Question rx 5700 — 0FL01 error — plz help!!
ksukhin
Neuling
Can anyone help me fix the 0FL01 error? I cannot flash my RX 5700 no matter what I try.
I’m using amdvbflash 3.04+ version from IgorsLab and the TechPowerUp. I tried flashing in Windows and in UEFI powershell from USB. I get the same error no matter what.
Mini_Me
Can anyone help me fix the 0FL01 error? I cannot flash my RX 5700 no matter what I try.
I’m using amdvbflash 3.04+ version from IgorsLab and the TechPowerUp. I tried flashing in Windows and in UEFI powershell from USB. I get the same error no matter what.
Greetings and welcome,
Please do not worry, this problem is fixable, first let us do the easy way by following the below,
I. Extract the downloaded AtiFlashTool v2.93+ with the backup bios file to a folder and put it in drive C,
Mini_Me
Urgestein
Can anyone help me fix the 0FL01 error? I cannot flash my RX 5700 no matter what I try.
I’m using amdvbflash 3.04+ version from IgorsLab and the TechPowerUp. I tried flashing in Windows and in UEFI powershell from USB. I get the same error no matter what.
Greetings and welcome,
Please do not worry, this problem is fixable, first let us do the easy way by following the below,
I. Extract the downloaded AtiFlashTool v2.93+ with the backup bios file to a folder and put it in drive C,
II. Boot to Windows Safe Mode (optional),
III. Open Command Prompt CMD as an administrator and navigate to the folder mentioned above,
IV. Now enter these commands below:
amdvbflash.exe -i
Press Enter
It will show you the gpu adapters list occupying the pcie slots for an example if there is only one gpu then its adapter number will be 0.
###########
amdvbflash.exe -unlockrom 0
Press Enter
It will unlock the gpu chip for flashing if it is locked.
###########
amdvbflash.exe -s 0 chooseAname.rom
Press Enter
To make a backup of the gpu bios if needed.
###########
amdvbflash.exe -p -f 0 BackupBiosName.ROM
Press Enter
To flash the bios, here — f to force the flash in case of error.
###########
V. Wait for the update to complete and reboot.
5700 to xt vbios flashing issue
dogcowmoof
New Member
Having issues in terms of flashing a stock Sapphire reference 5700 with a 5700XT reference bios. Before any attempt the stock bios was backed up, used DDU to remove drivers, and was booted in safe mode. After unlocking the bios via amdvbflash I then used amdvbflashwin to load the 5700xt bios, however receive an “Error in VBIOS Image” alert regardless of the reference xt bios I used from TPU.
DDU was used to clean out existing software, temp driver installed, ROM was unlocked via amdvbflash before using the Win GUI. Best to leave be or is this a known issue when using the GUI version? (3.31)
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Having issues in terms of flashing a stock Sapphire reference 5700 with a 5700XT reference bios. Before any attempt the stock bios was backed up, used DDU to remove drivers, and was booted in safe mode. After unlocking the bios via amdvbflash I then used amdvbflashwin to load the 5700xt bios, however receive an “Error in VBIOS Image” alert regardless of the reference xt bios I used from TPU.
DDU was used to clean out existing software, temp driver installed, ROM was unlocked via amdvbflash before using the Win GUI. Best to leave be or is this a known issue when using the GUI version? (3.31)
I suggest you start off with pictures of the SKU and Part Number Sticker, a GPU-Z Screenshot, post them here.
Then in GPU-Z click the black arrow next to the Uefi Checkbox. Attempt to upload the bios through GPU-Z to the VGA Bios Collection/Database, do not upload it in the thread. You may receive a prompt stating that the bios is already in the collection/database with a link to the file, copy and paste the link here.
If you do not receive the prompt, please proceed with the upload but in the description please add the SKU number and a model info of said card, then copy and paste that link here.
dogcowmoof
New Member
I suggest you start off with pictures of the SKU and Part Number Sticker, a GPU-Z Screenshot, post them here.
Then in GPU-Z click the black arrow next to the Uefi Checkbox. Attempt to upload the bios through GPU-Z to the VGA Bios Collection/Database, do not upload it in the thread. You may receive a prompt stating that the bios is already in the collection/database with a link to the file, copy and paste the link here.
If you do not receive the prompt, please proceed with the upload but in the description please add the SKU number and a model info of said card, then copy and paste that link here.
Sure thing capture below. Let me know if there’s a specific bios or another process. It is the reference version by Sapphire
Sapphire RX 5700 Tripple DP / Single HDMI 8GB GDDR6
P/N: 113-D1820201-101 Flash Type GD25WQ80C
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Ok you have a reference card, this is your current bios.
Sapphire RX 5700 VBIOS
dogcowmoof
New Member
Ok you have a reference card, this is your current bios.
Sapphire RX 5700 VBIOS
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Im about to get to that.
Lucky for you you can deal with just 2 files
Sapphire RX 5700 XT VBIOS
Sapphire RX 5700 XT VBIOS
dogcowmoof
New Member
Im about to get to that.
Lucky for you you can deal with just 2 files
Sapphire RX 5700 XT VBIOS
Sapphire RX 5700 XT VBIOS
Using the newest version of amdvbioswin still receiving the VBIOS error with any of the reference bios files. Again didn’t use the command line and force a flash
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Then look for Version 4.68, underneath 4.68 you will see a link to show older version, click that and you should see version 2.93
Follow these steps carefully:
1. Open your «C:» drive in Windows, create a new folder, call it atiflash.
2. Extract the contents of atiflash_293.zip to the «C:\atiflash» folder
3. Find the bios file you downloaded and rename the bios file to sp57x.rom
4. Move sp57x.rom to the «C:\atiflash» folder
5. Open the start menu, type cmd, when cmd.exe appears right click it and hit «Run as administrator»
6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.
7. Type in cd/atiflash and press enter, you should see C:\atiflash>
7a. At C:\atiflash> type in amdvbflash.exe -i to identify your gpu with a number (0,1,2)
8. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0 (or 1, 2)
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the «ROM Unlocked»
9. At the C:\atiflash> prompt type in
amdvbflash.exe -f -p 0 sp57x.rom (or 1,2)
(there is a space between the .exe and -f, and a space between -f and -p and 0)press enter.
Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen
Using the newest version of amdvbioswin still receiving the VBIOS error with any of the reference bios files. Again didn’t use the command line and force a flash
Zyll Goliat
| System Name | KING-XEON |
|---|---|
| Processor | Xeon 2697 V2(12c/24t) (OC-3,45Ghz-ALL*CORES—-TURBO BOOSTING 4,03Ghz) |
| Motherboard | Sabertooth X79 |
| Cooling | Xigmatek LOKI SD963 double-Fan |
| Memory | 64Gb DDR3 Kingston/Mushkin 1540Mhz Active clocks(9-9-9-24-162-1T) |
| Video Card(s) | 1)RX 5700 Sapphire-1910Mhz***2)MATROX M9120LP |
| Storage | 2 x ssd-Kingston 240Gb A400 in RAID 0+ HDD 500Gb +Samsung 128gbSSD +SSD Kinston 480Gb |
| Display(s) | BenQ 28″EL2870U(4K-HDR) / Acer 24″(1080P) / Eizo 2336W(1080p) / 2x Eizo 19″(1280×1024) |
| Case | Lian Li |
| Audio Device(s) | Realtek/Creative T20 Speakers |
| Power Supply | F S P Hyper S 700W |
| Mouse | Asus TUF-GAMING M3 |
| Keyboard | Func FUNC-KB-460/Mechanical Keyboard |
| VR HMD | Oculus Rift DK2 |
| Software | Win 11 |
| Benchmark Scores | Fire Strike=14610,Cinebench R15=1789,Cinebench R20=3791.Passmark=20689,Geekbench4=32885 |
You need to use CMD as Admin.
This is how I am doing it:
amdvbflash -i
amdvbflash -unlockrom 0 (if 0 is your card that you want to flash)
amdvbflash -f -p 0 name.rom (name of the bios you flashing.rom)
Also as I am currently using RX 5700 (same as yours Saphirre) I will suggest you that is way better if you mod your own bios with the Red Bios editor and MorePower tool Link
You can use MorePowerTool and also you don’t need to flash the bios if you want to try it will change your reg. so that you can try and see how that goes first.
P.S. I also tried RX 5700XT bios and honestly you ain’t going to get much card will pull much more power and it will heat faster and potentially could become unstable especially with the reference cooler. personally I modded my own bios to keep the card undervolted and low power consumption but also unlocked so that I can OC If I want.
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
You need to use CMD as Admin.
This is how I am doing it:
amdvbflash -i
amdvbflash -unlockrom 0 (if 0 is your card that you want to flash)
amdvbflash -f -p 0 name.rom (name of the bios you flashing.rom)
Also as I am currently using RX 5700 (same as yours Saphirre) I will suggest you that is way better if you mod your own bios with the Red Bios editor and MorePower tool Link
Reference cards were the easiest to flash
He was also usind 3.31 when 2.93 cmd version needs to be used. I wrote the guide for a reason as i got tired of writing everything out all the time
dogcowmoof
New Member
Then look for Version 4.68, underneath 4.68 you will see a link to show older version, click that and you should see version 2.93
Follow these steps carefully:
1. Open your «C:» drive in Windows, create a new folder, call it atiflash.
2. Extract the contents of atiflash_293.zip to the «C:\atiflash» folder
3. Find the bios file you downloaded and rename the bios file to sp57x.rom
4. Move sp57x.rom to the «C:\atiflash» folder
5. Open the start menu, type cmd, when cmd.exe appears right click it and hit «Run as administrator»
6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.
7. Type in cd/atiflash and press enter, you should see C:\atiflash>
7a. At C:\atiflash> type in amdvbflash.exe -i to identify your gpu with a number (0,1,2)
8. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0 (or 1, 2)
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the «ROM Unlocked»
9. At the C:\atiflash> prompt type in
amdvbflash.exe -f -p 0 sp57x.rom (or 1,2)
(there is a space between the .exe and -f, and a space between -f and -p and 0)press enter.
Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen
You do not use amdvbflaswin, you use command prompt, follow my directions above