RX 580 Flash ERROR: 0FL01
Jakiss
New Member
Hi,
I bought an older SAPPHIRE Radeon RX 580 Pulse, but it’s dead.
I plugged in a second GPU. turned on the PC.
The RX580 looks like the RX590 in Device Manager. «! code 43»
disable device / enable device. and is displayed without error.
so I tried AMD / ATI flash. more versions.
I always end up here:
Failed to read ROM
ERROR: 0FL01
I tried the command:
amdvbflash -f -p 1 bios.rom
Failed to read ROM
in the latest version:
amdvbflash -p -fp 1 bios.rom
AMDVBFLASH version 3.20 EXTERNAL, Copyright (c) 2021 Advanced Micro Devices, Inc.
Failed to read ROM
some ideas?
thank you very much
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Hi,
I bought an older SAPPHIRE Radeon RX 580 Pulse, but it’s dead.
I plugged in a second GPU. turned on the PC.
The RX580 looks like the RX590 in Device Manager. «! code 43»
disable device / enable device. and is displayed without error.
so I tried AMD / ATI flash. more versions.
I always end up here:
Failed to read ROM
ERROR: 0FL01
I tried the command:
amdvbflash -f -p 1 bios.rom
Failed to read ROM
in the latest version:
amdvbflash -p -fp 1 bios.rom
AMDVBFLASH version 3.20 EXTERNAL, Copyright (c) 2021 Advanced Micro Devices, Inc.
Failed to read ROM
some ideas?
thank you very much
That doesn’t work anymore, syntax has been changed.
Make sure the command prompt is open with administrator privileges then type in amdvbflash -? Or /? To get the list of commands and correct syntax, post the cmd prompt screen after you do the above.
ATIFlash ‘ERROR 0FL01’ FIX
bngchucky
New Member
If you have been suffering messages such as ‘Adapter not Found’ and ‘ERROR 0FL01’ or even ‘Invalid Adapter or BIOS Selected’ when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you’ve been looking for.
——
Part 1
——
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool
Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)
Step 3 Copy ATIFlash files USB Boot Drive
Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
——
Part 2
——
Step 1 Boot into ‘Safe Mode’ (by pressing f8 before booting into Windows)
Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager ‘Display Adapters’ and Uninstall (including Software when prompted)
Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
——
Part 3
——
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)
Step 2 Reboot into your Mobo’s Bios
Step 3 Once in your Mobo’s Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot
Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist
Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can’t be flashed until unlocked
Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed
Step 7 Once your Bios has been flashed simply ‘Ctrl+Alt+Delete’ to restart your PC
Step 8 Go straight back into your Mobo’s Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
——
Question GPU BIOS Flashing — Failed to read rom — ERROR: 0FL01(Sapphire RX 580 8GB Pulse only 20 MH/s)
TokyoSushiLlama
Prominent
Hello, this is my first post here.
I recently got an RX 580 Pulse from Sapphire.
It has Dual Bios — BIOS1 does not work (no image), BIOS2 does work BUT:
BIOS2 is a MSI BIOS (and not Sapphire like its supposed to be)
I guess that could be the reason the hash rate is so low
Anyway, I would like to flash the original Sapphire Pulse Micron BIOS to the card. I tried both Windows (amdvbflash / atiflash) and HiveOS for flashing, but both showed the same error:
Failed to read ROM
ERROR: 0FL01
BTW: In Windows I get 25MH/s, its only 15 MH/S when using HiveOS
OC: 1350 Core 2100 Memory
Any ideas why I get this error and how to fix this issue?
Fix_that_Glitch
Dignified
KhojiLtd
Hello, this is my first post here.
I recently got an RX 580 Pulse from Sapphire.
It has Dual Bios — BIOS1 does not work (no image), BIOS2 does work BUT:
BIOS2 is a MSI BIOS (and not Sapphire like its supposed to be)
I guess that could be the reason the hash rate is so low
Anyway, I would like to flash the original Sapphire Pulse Micron BIOS to the card. I tried both Windows (amdvbflash / atiflash) and HiveOS for flashing, but both showed the same error:
Failed to read ROM
ERROR: 0FL01
BTW: In Windows I get 25MH/s, its only 15 MH/S when using HiveOS
OC: 1350 Core 2100 Memory
Any ideas why I get this error and how to fix this issue?
ROM not erased. Error 0FL01
PRGamerDad
New Member
I’m trying to flash my Powercolor RX 5700 Red Devil to a Powercolor RX 5700 XT. Running Command Prompt as admin i have managed to unlock the ROM but i still can’t flash the XT version on my 5700. Keeps giving me the error above. the RSA signature verify is PASS. Even tried to amdvbflash.exe -f -p 0 5700xt.rom in command still to no avail. How can I bypass this ROM issue?
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
I’m trying to flash my Powercolor RX 5700 Red Devil to a Powercolor RX 5700 XT. Running Command Prompt as admin i have managed to unlock the ROM but i still can’t flash the XT version on my 5700. Keeps giving me the error above. the RSA signature verify is PASS. Even tried to amdvbflash.exe -f -p 0 5700xt.rom in command still to no avail. How can I bypass this ROM issue?
First of all stop.
Follow my directions.
Get GPU-Z, take a screenshot, then click the arrow next to the uefi checkbox and attempt to upload the bios to the VGA Bios Collection through the program itself, you may get prompted that the bios is already in the database with a link, copy and paste link here. If you don’t get that prompt proceed to upload and then get the link after wards.
Take a picture of white sticker label on the back of card and post here
I will guide you the best I can, ive helped others flash challenger d, pulse, dual ultra to xt variants. I need information to help you though.
PRGamerDad
New Member
Here’s the screenshot and the card I’m using linked below
Powercolor RX 5700 VBIOS
Attachments
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Here’s the screenshot and the card I’m using linked below
Powercolor RX 5700 VBIOS
PRGamerDad
New Member
I tried the bios below for the flash first said the sub ID’s didn’t matched so then I looked up was around that and i found this video. Didn’t do any powertables just the amd flash from techpowerup here.
Powercolor RX 5700 XT VBIOS
Attachments
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
If im not mistaken that card has a dual bios switch.
PowerColor Red Devil Radeon™ RX 5700 8GB GDDR6 — PowerColor
It appears from the bios you gave me the switch is in the silent bios position. (180W)
Find that switch on your card and close GPU-Z, flip the switch, reopen gpu-z and do the same thing to get the bios link for the performance side.
PRGamerDad
New Member
I have it switched to the oc mode when I installed it. Should I switch it to the silent mode?
edit: yes it does have a bios switch just to confirm.
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Wait, are you telling me the bios you gave is from the performance/OC side?
Start this over, get the gpu-z link from the other bios switch position please.
Better yet get both sides and label them please
We will continue this when I am fresh, I would suggest you rest up as well, so that the mind is sharp. It is almost 11PM here.
I will try my best to help you see this through but have patience please.
Lets rest up till tomorrow. Do not abandon these forums.
PRGamerDad
New Member
Yes the switch was set to the OC side when I sent those last bios from gpu-z.
I’ll send the bios from the silent mode later and sounds good.
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Its 80% wisdom 10% knowledge and skill and 100% prayer in the power of His will
Yes the switch was set to the OC side when I sent those last bios from gpu-z.
I’ll send the bios from the silent mode later and sounds good.
PRGamerDad
New Member
Attachments
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Please get the link for that other bios I need to verify some additional information
I need to cross verify both bios on your card @PRGamerDad
PRGamerDad
New Member
Attachments
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Okay I need the link to both the silent and OC bios files, not the images this time.
There is info the files show in the links that the images do not.
PRGamerDad
New Member
My apologize I misunderstood you. Will be doing this in two separate replies. this first link is it in the OC mode
AMD RX 5700 VBIOS
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
PRGamerDad
New Member
Here is the silent side of the bios
AMD RX 5700 VBIOS
eidairaman1
The Exiled Airman
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Here is the silent side of the bios
AMD RX 5700 VBIOS
As i thought there is a difference between the 2, its the TDP your quiet bios is 160W and your oc bios is 180W.
Use gpu-z and save your bios files using the arrow to your desktop, make sure to label your quiet bios and your oc bios.
For recovery purposes.
I will look at files now.
Follow these directions,
Remove all GPU Drivers using Display Driver Uninstaller before flashing. (Follow directions)
AMDVBFlash / ATI ATIFlash (3.31) Download
Flash 1 side at a time and verify the card is powering monitor properly after restart.
Follow these directions closely
Use this bios for the performance Side only
Powercolor RX 5700 XT VBIOS
Powercolor RX 5700 XT VBIOS
Since the Subsystem ID will be changing slightly you will need to do a force flash in an administrator privileged command prompt. (Find cmd in start menu right click and open as administrator)
If that is not performed you may receive the stupid 0FL error.
Then follow this command
Enter this command first
Amdvbflash.exe -unlockrom 0
Then enter this command
amdvbflash -f -p 0 XXXX .rom
Note: XXXX is the name of the VBIOS file you downloaded. You can also change the downloaded file name to a simple name.
This is alternate way:
Create a new text file in your ATIFlash directory, name it FLASH.bat, and place this code into it:
echo Flashing card 0 with BIOS.rom.
echo.
amdvbflash -p 0 -f BIOS.rom
echo.
pause
Assuming the new BIOS you want to flash onto your card is named BIOS.rom, this is the BIOS it will use for flashing.
Save your changes, then run the batch file by double-clicking on it.
Once you’ve received a success message, reboot your computer for the new BIOS to come into effect. If you can boot into Windows successfully, then that’s good! (Note: your screen may flicker for a bit, because you basically have a new card, and Windows is trying to recognize it. If you want to be thorough, go ahead and do a clean re-install of your graphics drivers.)
Last resort methods to flash back, possibly flash forward.
If you need to flashback to a 5700
Use this method (might work for flashing to XT as well)
Reflashing to original 5700 non XT bios fails with «ROM not erased ERROR/ F0L01»
Reflashing to original 5700 non XT bios fails with «ROM not erased ERROR/ F0L01»
There is a tool powercolor uses but I am blind to how it works, you just extract the tool from the 5600xt file. And use with a 5700/xt bios to flash or flash back i believe. (Delete the 5600xt bios immediately)