Error getting files list



Cannot get file list from ftp using ls() #39

Comments

I have FTP server which has a folder with a bunch of images in it. I do not know the image names. I want to access all the image files from that FTP folder and read them as base64 format one by one, so I can upload them to some other destination. I am trying to get the list of files in the ftp using the ls() method but run into the error below.

I get the following error:

Error getting file list:

The text was updated successfully, but these errors were encountered:

node-ftps is a lftp wrapper, can you check if you have lftp installed on your computer?

lftp was not installed on my computer. I just installed it, but now it gives the following error:

Error getting file list: cd: Fatal error: Certificate verification: subjectAltName does not match ‘mydomain.com’

Another question I had was that I am making this node.js application for some clients to use but this means all of them have to have lftp installed on their computers. The end users for my app are not so tech savvy people, that’s why this tool is being made for them where they can just give their ftp credentials and get the image import done.

For the SSL error, it’s because the certificate is not valid for the domain. Try to use the autoConfirm: true option.

What you can do is to create an API based on it and call your API from your application to avoid installing lftp on their computers, or wrapping it in your application and calling the binary directly.

I have made the autoConfirm: true (in the code given above). But it is still showing this error.

So this is definitely an error from your SSL certificate on your server, not from node-ftps

Oh ok, I will diagnose the error and see if anything is missing from my side. Thanks for the help, I really appreciate it.

Источник

Files list file for package ‘package’ is missing final newline

To resolve this issue I have run these commands

But when I try to install any new packages or upgrade using the below command it gives errors for other packages.

What could have caused this problem and how can I resolve it?

I have removed libcap-ng0:amd64 files from /var/lib/dpkg/info folder and later tried to reinstall it but now it has provided error for other package and warning for libcap-ng0.
It has occurred for rest packages in same way

4 Answers 4

Here are step by step instructions to fix this problem, which appears to be file corruption in the .list files related to these pacakges:

  1. Verify that the .list files are full of garbage:

cat /var/lib/dpkg/info/ .list

  1. Remove the corrupt .list file:

sudo rm /var/lib/dpkg/info/ .list

  1. Run the reinstall for that package (will show a warning, but should reinstall):

sudo apt install —reinstall

If what happened to me happens to you, each time you run this it will run into another corrupted .list file and you will have to step through many before your system is fixed. If you have many, then step three is optional — just run one sudo apt upgrade at the end and it will reinstall everything you need.

Well, with a big help from #debian at freenode, I found the solution (thanks justin!!):

the file /var/lib/dpkg/info/smbfs.list was corrupted, it was all binary crap. Dunno how this could happen, but it was. So justin advised me to delete the file (actually, I moved it) — and, voila, apt warned me that the files list could not be found for smbfs, but at least I could apt-get remove smbfs —purge and install it again ( apt-get install smbfs ) — that took the biscuit!

Читайте также:  What is baud rate error

If you’re getting 50-80 damaged files on multiple machines like me, the manual method will be an endless task, so here’s my take on the issue (Tested on Ubuntu 20.04). This is basically an automated version of yourcomputergenius’ answer:

  • checks all files in the directory
  • renames all files with binary content by appending __DAMAGED to the filename
  • then:
    • sorts out all damaged files
    • extracts the package names of the filenames
    • drops duplicate package names
    • then feeds the remaining list to apt to reinstall the affected packages

I hope it helps anybody who encounters this problem!

Источник

Как исправить ошибку «Не удалось получить список каталогов» в FileZilla?

FileZilla – это специализированное FTP-приложение, которое используется для обмена файлами по сети. Работает по принципу «клиент-сервер». Но иногда при попытке подключится к серверу FileZilla, пользователи сталкиваются с ошибкой «не удалось получить список каталогов».

Чем вызвана ошибка?

Ошибка получения списка каталогов при подключении к серверу FileZilla может возникнуть по ряду причин:

  1. Соединение заблокировано брандмауэром Windows. Даже если установлено исключение для определенного порта в этом инструменте контроля за трафиком, FileZilla использует «Пассивный режим» для получения или отправки файлов. То есть для передачи могут быть открыты любые порты TCP, при блокировке которых приложение выбрасывает эту ошибку.
  2. Используется зашифрованное соединение, при котором могут возникнуть проблемы с подключением к серверу.

Создание правила в брандмауэре

Сообщение о неполадке при получении списков каталогов часто возникает из-за блокировки брандмауэром подключения FileZilla. В этом решении сначала ограничим порты клиента, затем добавим их в список исключений межсетевого экрана.

Запустите FileZilla Server, щелкните на «Edit» и выберите «Settings».

На левой панели щелкните на опцию «Passive Mode Settings» и отметьте флажком «Use Custom Port Range».

В первом и во втором поле введите «2100» и сохраните настройки.

В меню Пуск кликните на значок шестеренки для входа в параметры Windows. Перейдите в раздел «Обновления и безопасность».

На вкладке Безопасность Windows откройте Брандмауэр и защита сети.

Перейдите в «Дополнительные параметры».

Затем кликните на «Правила для входящих подключений», на правой панели Действие выберите «Создать правило».

В открывшемся окне укажите тип правила «Для порта» и продолжите.

Отметьте флажком опции «протокол TCP», «Определенные локальные порты» и наберите в поле «21, 2100» и продолжите.

Примечание: вместо 21 впишите порт, который был указан при установке сервера.

В окне Действие установите флажок «Разрешить подключение».

В следующем окне отметьте все три профиля: доменный, частный, публичный и продолжите.

Присвойте имя новому правилу и нажмите на «Готово».

Повторите эти действия для создания исходящего правила.

После добавления правил проверьте, сохраняется ли проблема.

Изменение настроек шифрования

Проблема также связана с настройками шифрования. Чтобы исправить ошибку получения списков каталогов при подключении к серверу FileZilla попробуйте отключить шифрование. Выполните следующие шаги.

Откройте клиента FileZilla на клиентском компьютере. В верхнем меню приложения перейдите в Файл – Менеджер сайтов.

Если еще нет созданных подключений, кликните на кнопку «Новый сайт». Добавьте хост, логин и пароль для доступа к FTP.

В пункте «Тип входа» кликните на выпадающий список и установите значение «Нормальный». В пункте «Шифрование» разверните выпадающее меню и выберите «Использовать обычный FTP».

Читайте также:  Cyclic redundancy error checking

После попробуйте установить соединение.

Изменение конфигурации FTP

Если по-прежнему не удается подключиться к серверу FileZilla из-за проблем с получением списка каталога, попробуйте изменить параметры FTP соединения.

В меню клиента перейдите на вкладку Редактирование, затем щелкните на Настройки.

Разверните раздел Соединение — FTP. Отметьте опцию «Разрешить возврат к другому режиму при сбое».

Затем на вкладке «Активный режим» установите флажок на «Получить сведения о внешнем IP-адресе в настройках системы».

На вкладке «Пассивный режим» выберите опцию «Вернуться в активный режим».

Сохраните изменения и проверьте, возникает ли ошибка.

Изменение имени хоста

Иногда удается устранить проблему путем изменения имени хоста для инициализации определенного протокола.

Откройте клиента FileZilla и в основном окне приложения щелкните в поле хоста. Перед фактическим именем хоста наберите «sftp://».

Введите остальные данные и проверьте, удалось ли исправить ошибку получения списка каталогов.

Источник

Thread: files list file for package ‘xxx’ is missing final newline

Thread Tools
Display

files list file for package ‘xxx’ is missing final newline

Ok, i’ve had this error for several weeks now and have not been able to install ANY updates. Did some searching and couldn’t find much info, so decided to check it out myself. The ‘missing final newline’ was a bit of a giveaway really, so i created a python script to check how many files inside /var/lib/dpkg/info/ were actually missing the final newline character.

I then modified my script to append a newline to the files that were missing it, which fixed my problem. Not sure how these files managed to get corrupted but hey-ho. Is this a satisfactory answer or will i be misleading new users by posting this script.

# 8th November, 2009
# update manager failed, giving me the error:
# ‘files list file for package ‘xxx’ is missing final newline’ for every package.
# some Googling revealed that this problem was due to corrupt files(s) in /var/lib/dpkg/info/
# looping though those files revealed that some did not have a final new line
# this script will resolve that problem by appending a newline to all files that are missing it
# NOTE: you will need to run this script as root, e.g. sudo python newline_fixer.py

dpkg_path = ‘/var/lib/dpkg/info/’
paths = os . listdir ( dpkg_path )
for path in paths :
path = dpkg_path + path
f = open ( path , ‘a+’ )
data = f . read ()
if len ( data ) > 1 and data [- 1 :] != ‘\n’ :
f . write ( ‘\n’ )
print ‘added newline character to:’ , path
f . close ()

Last edited by pokerbirch; November 8th, 2009 at 11:24 PM .

Источник

error: Unable to load contents of file list: ‘/Target Support Files/Pods-xxx/Pods-xxx-frameworks-Debug-input-files.xcfilelist’ (in target ‘xxx’) #1

Comments

Hi I got this error when trying to integrate Unity in my own project.

XCode Version 10.2.1

error: Unable to load contents of file list: ‘/Target Support Files/Pods-SMarket/Pods-SMarket-frameworks-Debug-input-files.xcfilelist’ (in target ‘SMarket’)

error: Unable to load contents of file list: ‘/Target Support Files/Pods-SMarket/Pods-SMarket-frameworks-Debug-output-files.xcfilelist’ (in target ‘SMarket’)

error: Unable to load contents of file list: ‘/Target Support Files/Pods-SMarket/Pods-SMarket-resources-Debug-input-files.xcfilelist’ (in target ‘SMarket’)

error: Unable to load contents of file list: ‘/Target Support Files/Pods-SMarket/Pods-SMarket-resources-Debug-output-files.xcfilelist’ (in target ‘SMarket’)

My Target -> Build Phases:

[CP] Copy Pods Resources

[CP] Embed Pods Frameworks

I tried this solution /clean and rebuild the project, still failed, do you have any idea about this?

The text was updated successfully, but these errors were encountered:

I found out under [CP] Embed Pods Frameworks and [CP] Copy Pods Resources , there’re input files and output files sections. Just deleted files in those sections, and it works.

Читайте также:  An error occurred while connecting to epic servers что делать

But I still have no idea why this error is generated.

you can use pod cache clean —all is work for me.

i did delete those files and then i get error that wants me to run pod install. after that those files came back and this cycle continue 🙁
also pod cache clean —all not helping

@P-B1101
I am stuck in same cycle. did you get any solution ?

Sorry, I don’t remember what was the issue at all. :((

I am currently stuck on this as well, would love an answer for that. I’m getting the following error:
«The sandbox is not in sync with the Podfile.lock. Run ‘pod install’ or update your CocoaPods installation.»
I’ve been trying to delete cocoapods to move to the SDK package manager

Got it to work, this is the workaround

Switch from Cocoapods to SDK Package Manager
Delete the 2 profile and profile.lock files in the folder location of your project
Delete the .xcodeproj version of the file
Open the normal version of the file
Delete the Pod and Framework files
Empty the trash bin

In terminal run the following 2:
HomeBrew uninstall:
/bin/bash -c «$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/uninstall.sh)»
Cocoapods removal:
gem list —local | grep cocoapods
Remove cocopods with the version you have
By example, to remove cocopods version 1.9.3 I used this command:
sudo gem uninstall cocoapods -v 1.9.3
(Note: sudo will ask for your administrator password.)

1- Go to your project’s target, -> Build Phases -> Delete [CP] Copy Pods Resources.

Delete [CP] Embed Pods Frameworks

(Delete it with the x on the right side of the screen)

I found out under [CP] Embed Pods Frameworks and [CP] Copy Pods Resources , there’re input files and output files sections. Just deleted files in those sections, and it works.

But I still have no idea why this error is generated.

Please teach me more detail,how to do?

Like others have mentioned, deleting those input/output files don’t solve the issue since they come back as soon as pod install is run once again.

I found out under [CP] Embed Pods Frameworks and [CP] Copy Pods Resources , there’re input files and output files sections. Just deleted files in those sections, and it works.

But I still have no idea why this error is generated.

this works for me. thanks

pod cache clean —all

arch -x86_64 pod install

arch -x86_64 pod install

Thanks, I spent 3 hours to fix this problem. you saved my time.

arch -x86_64 pod install

This works perfectly. Many thanks @bobokhon7
Ensure you run this on the root of the iOS folder where you have the Podfile.

I was merging a branch, just went to the pod file and tried to install pods, this drove me in to this issue.

What I did to fix it?

follow this steps:

  1. delete yarn.lock
  2. delete node_modules folder
  3. run yarn
  4. go to the ios folder
  5. delete Podfile.lock
  6. delete Pods folder
  7. run pod install

The issue is gone!

I fixed it using the correct version of flutter which matching with my project dependency. I used the latest version of a flutter but my project is not supporting that version so downgrade the version and the issue is resolved.

Источник

Оцените статью
toolgir.ru
Adblock
detector