Error invalid server check your port forwarding settings connection to lobby failed attempt number



Error invalid server check your port forwarding settings connection to lobby failed attempt number

Everytime I start the server I get a ⬇

RESPONSE: ERROR,INVALID SERVER,CHECK YOUR PORT FORWARDING SETTINGS
CONNECTION TO LOBBY FAILED, ATTEMPT NUMBER 1


That’s how I did it

I put the IPV4 address in to the LAN IP Address

A few tips that might help out.

It looks like your Port Forwarding on the Router was done correctly based
on what I could see from the screen-capture links that you provided.
After making changes to the Router it’s not a bad idea to tell the Router to reboot.

acServer.exe needs access to those ports that you opened up on the Router, so
you might check your «Windows Defender» — Inbound Rules to make sure acServer.exe
has access to either «All Ports» or the «Specific Ports» that you opened up on the Router.
Also you might try rebooting your PC as well after making changes to «Windows Defender»

A few more things to check.

Check your server_cfg.ini for the following entries listed below.
For testing purposes only keep the Server Title/Name simple/clean.
An «Admin Password» is required for the server to launch properly.
Verify The Routers Port Forwarding Information For The Server By Checking
To See If The IP Address Used Still Matches The Server’s Current IP Address.
Check The UDP/TCP Port Values And Verify That They Match The Values Used In The
«server_cfg.ini» file.

[SERVER]
NAME=My Cool Test Server
ADMIN_PASSWORD=acadmin
UDP_PORT=9600
TCP_PORT=9600
HTTP_PORT=8081
LOCKED_ENTRY_LIST=0
PICKUP_MODE_ENABLED=1
LOOP_MODE=1
REGISTER_TO_LOBBY=1

Источник

Error invalid server check your port forwarding settings connection to lobby failed attempt number

leave the black window open, if it closes itself after a few minutes then you probably havent set your ports correctly and will not show in the server list.

if you have set everything up correctly but still cant see it in the list then you have to click the correct filter options, ‘show passworded server’ is usually the culprit.

I also have this problem, I assign a static ip to the PC I’m using then open these ports UDP 9600, TCP 9600, HTTP 8081 (the router doesn’t have a setting for HTTP so I open 8081 on TCP & UDP) on the router, but still it fails to launch the server.

I get this message «ERROR,INVALID SERVER,CHECK YOUR PORT FORWARDING SETTINGS LOBBY COULD NOT BE RACHED, SHUTTING SERVER DOWN»

So could my ISP be stoping me opening the ports? because the router says they’re open.

My ISP is TalkTalk they’re pretty bad and my router is TP-Link TD-W8968, any help would be much appreciated; all I really want to do is just race a friend 1v1.

Источник

Error invalid server check your port forwarding settings connection to lobby failed attempt number

Everytime I start the server I get a ⬇

RESPONSE: ERROR,INVALID SERVER,CHECK YOUR PORT FORWARDING SETTINGS
CONNECTION TO LOBBY FAILED, ATTEMPT NUMBER 1


That’s how I did it

Читайте также:  Ошибка mysql error no database selected

I put the IPV4 address in to the LAN IP Address

A few tips that might help out.

It looks like your Port Forwarding on the Router was done correctly based
on what I could see from the screen-capture links that you provided.
After making changes to the Router it’s not a bad idea to tell the Router to reboot.

acServer.exe needs access to those ports that you opened up on the Router, so
you might check your «Windows Defender» — Inbound Rules to make sure acServer.exe
has access to either «All Ports» or the «Specific Ports» that you opened up on the Router.
Also you might try rebooting your PC as well after making changes to «Windows Defender»

A few more things to check.

Check your server_cfg.ini for the following entries listed below.
For testing purposes only keep the Server Title/Name simple/clean.
An «Admin Password» is required for the server to launch properly.
Verify The Routers Port Forwarding Information For The Server By Checking
To See If The IP Address Used Still Matches The Server’s Current IP Address.
Check The UDP/TCP Port Values And Verify That They Match The Values Used In The
«server_cfg.ini» file.

[SERVER]
NAME=My Cool Test Server
ADMIN_PASSWORD=acadmin
UDP_PORT=9600
TCP_PORT=9600
HTTP_PORT=8081
LOCKED_ENTRY_LIST=0
PICKUP_MODE_ENABLED=1
LOOP_MODE=1
REGISTER_TO_LOBBY=1

Источник

Error invalid server check your port forwarding settings connection to lobby failed attempt number

Everytime I start the server I get a ⬇

RESPONSE: ERROR,INVALID SERVER,CHECK YOUR PORT FORWARDING SETTINGS
CONNECTION TO LOBBY FAILED, ATTEMPT NUMBER 1


That’s how I did it

I put the IPV4 address in to the LAN IP Address

A few tips that might help out.

It looks like your Port Forwarding on the Router was done correctly based
on what I could see from the screen-capture links that you provided.
After making changes to the Router it’s not a bad idea to tell the Router to reboot.

acServer.exe needs access to those ports that you opened up on the Router, so
you might check your «Windows Defender» — Inbound Rules to make sure acServer.exe
has access to either «All Ports» or the «Specific Ports» that you opened up on the Router.
Also you might try rebooting your PC as well after making changes to «Windows Defender»

A few more things to check.

Check your server_cfg.ini for the following entries listed below.
For testing purposes only keep the Server Title/Name simple/clean.
An «Admin Password» is required for the server to launch properly.
Verify The Routers Port Forwarding Information For The Server By Checking
To See If The IP Address Used Still Matches The Server’s Current IP Address.
Check The UDP/TCP Port Values And Verify That They Match The Values Used In The
«server_cfg.ini» file.

[SERVER]
NAME=My Cool Test Server
ADMIN_PASSWORD=acadmin
UDP_PORT=9600
TCP_PORT=9600
HTTP_PORT=8081
LOCKED_ENTRY_LIST=0
PICKUP_MODE_ENABLED=1
LOOP_MODE=1
REGISTER_TO_LOBBY=1

Источник

Problem with starting server

theREVerned

theREVerned

Hello there. Yesterday I bought AC and I wanna play with my friend, however I have some issues with starting server. Log file says:

Читайте также:  Range check error орион про

«Starting HTTP server on port 8081
Registering to AC central server
[i just cut the adress here to make it shorter a bit]
RESPONSE: ERROR,INVALID SERVER,CHECK YOUR PORT FORWARDING SETTINGS
CONNECTION TO LOBBY FAILED»

My server and router settings are like:

Firewall allows everything for acs, acserver, and assetto corsa.

What do I do wrong?

dwightyone

dwightyone

Check whether your http port on your router matches the one in your server config file. Some router need to have 2 digit number for http port on router. If yours is like that change it to 80 and save on router then match it in the config server file (Where it will state 8081 but change it to 80). Also you don’t need to start ac steam dedicated server — just start the ac server using the ac server manager which is located assetto root folder/server folder/assetto server manager — in the same folder is the server config file — i have mine setup with my router ensuring the port numbers match the port numbers in the server config file.

And last but not least double check your firewall — sometimes windows firewall won’t even have the «acserver» in its allow apps list. If this is the case manually do it by looking for the icon that says let another app through (something like that it says) then guide the windows firewall to your assetto root folder/server ac server manager plus do the same again and guide it to the acserver in the same folder.

If still no joy then router port settings assetto must have udp and tcp settings in the router and all to match your server config file etc.

Also use ipv4 number for router — use cmd and then type in ipconfig to get it. The other computer if I remember rightly each pc also needs it’s own port settings in the router/server config file which are different to the other pcs as you can’t share port in router for lan

Excuse typos etc..

dwightyone

dwightyone

theREVerned

theREVerned

Thanks guys. Very informative for everyone who suffers from same issue.
I checked everythig and everything looked just fine but still with no success to start the server.

However I finally SOLVED the problem! Long story short — I called my ISP and it turned out that by default I can’t do port forwarding with my ISP, because (if I remember correct) «our» IP’s are private, not public. So my ISP admin changed it for my adress. Server worked right after I pressed «start server» button

So I hope that this topic will eventually help someone elese in future.

SCSV1

SCSV1

Check whether your http port on your router matches the one in your server config file. Some router need to have 2 digit number for http port on router. If yours is like that change it to 80 and save on router then match it in the config server file (Where it will state 8081 but change it to 80). Also you don’t need to start ac steam dedicated server — just start the ac server using the ac server manager which is located assetto root folder/server folder/assetto server manager — in the same folder is the server config file — i have mine setup with my router ensuring the port numbers match the port numbers in the server config file.

Читайте также:  Javascript uncaught exception object

And last but not least double check your firewall — sometimes windows firewall won’t even have the «acserver» in its allow apps list. If this is the case manually do it by looking for the icon that says let another app through (something like that it says) then guide the windows firewall to your assetto root folder/server ac server manager plus do the same again and guide it to the acserver in the same folder.

If still no joy then router port settings assetto must have udp and tcp settings in the router and all to match your server config file etc.

Also use ipv4 number for router — use cmd and then type in ipconfig to get it. The other computer if I remember rightly each pc also needs it’s own port settings in the router/server config file which are different to the other pcs as you can’t share port in router for lan

Excuse typos etc..

efecakir35

efecakir35

Yönlendiricinizdeki http bağlantı noktasının sunucu yapılandırma dosyanızdakiyle eşleşip eşleşmediğini kontrol edin. Bazı yönlendiricilerin, yönlendiricideki http bağlantı noktası için 2 haneli numaraya sahip olması gerekir. Sizinki böyleyse, 80 olarak değiştirin ve yönlendiriciye kaydedin, ardından yapılandırma sunucusu dosyasında eşleştirin (8081’i belirtir ancak 80 olarak değiştirir). Ayrıca ac steam adanmış sunucusunu başlatmanıza gerek yok — ac sunucusunu, varlıkta kök klasör/sunucu klasörü/assetto sunucu yöneticisinde bulunan ac sunucu yöneticisini kullanarak başlatın — aynı klasörde sunucu yapılandırma dosyası var — benimki var yönlendiricimle kurulum, bağlantı noktası numaralarının sunucu yapılandırma dosyasındaki bağlantı noktası numaralarıyla eşleşmesini sağlayın.

Ve son olarak, en az değil, güvenlik duvarınızı iki kez kontrol edin — bazen Windows güvenlik duvarında izin verilen uygulamalar listesinde «acserver» bile bulunmaz. Bu durumda, başka bir uygulamanın geçmesine izin ver yazan simgeyi arayarak (bunun gibi bir şey yazıyor) manuel olarak yapın, ardından Windows güvenlik duvarını varlığınıza yönlendirerek kök klasör/sunucu ac sunucu yöneticisine ve aynısını tekrar yapın ve acserver aynı klasörde.

Hala neşe yoksa, yönlendirici bağlantı noktası ayarları varlığı, yönlendiricide udp ve tcp ayarlarına sahip olmalıdır ve hepsinin sunucu yapılandırma dosyanızla eşleşmesi için vb.

Ayrıca yönlendirici için ipv4 numarasını kullanın — cmd kullanın ve ardından almak için ipconfig yazın. Doğru hatırlıyorsam diğer bilgisayar, yönlendirici/sunucu yapılandırma dosyasında diğer bilgisayarlardan farklı olan kendi bağlantı noktası ayarlarına ihtiyaç duyar, çünkü lan için yönlendiricide bağlantı noktasını paylaşamazsınız.

Источник

Оцените статью
toolgir.ru
Adblock
detector