Error java exception java heap space

Error java exception java heap space

If your application’s execution time becomes longer, or if the operating system seems to be performing slower, this could be an indication of a memory leak. In other words, virtual memory is being allocated but is not being returned when it is no longer needed. Eventually the application or the system runs out of memory, and the application terminates abnormally.

This chapter contains the following sections:

The java.lang.OutOfMemoryError Error

One common indication of a memory leak is the java.lang.OutOfMemoryError error. This error indicates that the garbage collector cannot make space available to accommodate a new object, and the heap cannot be expanded further. This error may also be thrown when there is insufficient native memory to support the loading of a Java class. In rare instances, the error is thrown when an excessive amount of time is being spent performing garbage collection, and little memory is being freed.

The java.lang.OutOfMemoryError error can also be thrown by native library code when a native allocation cannot be satisfied (for example, if swap space is low).

A stack trace is printed when a java.lang.OutOfMemoryError error is thrown.

An early step to diagnose a java.lang.OutOfMemoryError error is to determine its cause. Was it thrown because the Java heap is full or because the native heap is full? To help you discover the cause, a detail message is appended to the text of the exception, as shown in the following examples:

Detail Message: Java heap space

Cause: The detail message Java heap space indicates that an object could not be allocated in the Java heap. This error does not necessarily imply a memory leak. The problem can be as simple as a configuration issue, where the specified heap size (or the default size, if it is not specified) is insufficient for the application. The initial and maximum size of the Java heap space can be configured using the –Xms and –Xmx options.

The APIs that are called by an application could also unintentionally be holding object references.

One other potential source of this error arises with applications that make excessive use of finalizers. If a class has a finalize method, then objects of that type do not have their space reclaimed at garbage collection time. Instead, after garbage collection, the objects are queued for finalization, which occurs at a later time. In the Oracle implementations of the Java Runtime, finalizers are executed by a daemon thread that services the finalization queue. If the thread cannot keep up with the finalization queue, then the Java heap could fill up, and this kind of java.lang.OutOfMemoryError error would be thrown. One scenario that can cause this situation is when an application creates high-priority threads that cause the finalization queue to increase at a rate that is faster than the rate at which the finalizer thread is servicing that queue.

Action: Try increasing the Java heap size. See Monitoring the Objects Pending Finalization to learn more about how to monitor objects for which finalization is pending. See Finalization and Weak, Soft, and Phantom References in Java Platform, Standard Edition HotSpot Virtual Machine Garbage Collection Tuning Guide for information about detecting and migrating from finalization.

Detail Message: GC Overhead limit exceeded

Cause: The detail message GC overhead limit exceeded indicates that the garbage collector (GC) is running most of the time, and the Java application is making very slow progress. After a garbage collection, if the Java application spends more than approximately 98% of its time performing garbage collection and if it is recovering less than 2% of the heap and has been doing so for the last five (compile-time constant) consecutive garbage collections, then a java.lang.OutOfMemoryError error is thrown. This error is typically thrown because the amount of live data barely fits into the Java heap leaving little free space for new allocations.

Action: Increase the heap size. The java.lang.OutOfMemoryError error for GC Overhead limit exceeded can be turned off using the command-line flag -XX:-UseGCOverheadLimit .

Detail Message: Requested array size exceeds VM limit

Cause: The detail message «Requested array size exceeds VM limit» indicates that the application (or APIs used by that application) attempted to allocate an array with a size larger than the VM implementation limit, irrespective of how much heap size is available.

Action: Ensure that your application (or APIs used by that application) allocates an array with a size less than the VM implementation limit

Detail Message: Metaspace

Cause: Java class metadata (the virtual machine’s internal presentation of a Java class) is allocated in native memory (referred to here as Metaspace). If the Metaspace for class metadata is exhausted, a java.lang.OutOfMemoryError error with a detail message Metaspace is thrown. The amount of Metaspace that can be used for class metadata is limited by the parameter MaxMetaSpaceSize , which can be specified on the command line. When the amount of native memory needed for class metadata exceeds MaxMetaSpaceSize , a java.lang.OutOfMemoryError error with detail message Metaspace is thrown.

Action: If MaxMetaSpaceSize has been specified on the command-line, increase its value. Metaspace is allocated from the same address space as the Java heap. Reducing the size of the Java heap will make more space available for Metaspace. This trade-off is only useful if there is an excess of free space in the Java heap. See the following action for the Out of swap space detail message.

Detail Message: request size bytes for reason . Out of swap space?

Cause: The detail message request size bytes for reason . Out of swap space? appears to be a java.lang.OutOfMemoryError error. However, Java reports this apparent error when an allocation from the native heap failed and the native heap might be close to exhaustion. The message indicates the size (in bytes) of the request that failed and the reason for the memory request. Usually the reason is the name of a source module reporting the allocation failure, although sometimes it indicates the actual reason.

Action: When this error is thrown, the Java VM (JVM) invokes the fatal error handling mechanism: it generates a fatal error log file, which contains useful information about the thread, process, and system at the time of the crash. In the case of native heap exhaustion, the heap memory and memory map information in the log can be useful. See Fatal Error Log.

You might need to use troubleshooting utilities for the operating system to diagnose the issue further. See Native Operating System Tools.

Detail Message: Compressed class space

Cause: On 64-bit platforms, a pointer to class metadata can be represented by 32-bit offset (with UseCompressedOops ). This is controlled by the command-line flag UseCompressedClassPointers ( true by default). If UseCompressedClassPointers is true , the amount of space available for class metadata is fixed at the amount CompressedClassSpaceSize . If the space needed for UseCompressedClassPointers exceeds CompressedClassSpaceSize , a java.lang.OutOfMemoryError error with detail message Compressed class space is thrown.

There are bounds on the acceptable size of CompressedClassSpaceSize . For example -XX:CompressedClassSpaceSize=4g , exceeds acceptable bounds and will result in a message such as

There is more than one kind of class metadata: –klass metadata, and other metadata. Only klass metadata is stored in the space bounded by CompressedClassSpaceSize . Other metadata is stored in Metaspace.

Cause: This detail message indicates that a native method, has encountered an allocation failure. The difference between this and the previous message is that the allocation failure was detected in a Java Native Interface (JNI) or native method rather than in the JVM itself.

Читайте также:  Error code 1175 to disable safe mode toggle the option in preferences

Action: If this type of java.lang.OutOfMemoryError error is thrown, you might need to use native utilities of the operating system to diagnose the issue further. See Native Operating System Tools.

Detecting a Memory Leak

The java.lang.OutOfMemoryError error can be an indication of a memory leak in a Java application. It might also indicate that either the Java heap, Metaspace or the Compressed Class space is sized smaller than the memory requirements of the application for that specific memory pool. Before assuming a memory leak in the application, ensure that the memory pool for which you are seeing the java.lang.OutOfMemoryError error is sized adequately. The Java heap can be sized using the –Xmx and –Xms command-line options, and the maximum and initial size of Metaspace can be configured using MaxMetaspaceSize and MetaspaceSize . Similarly, the Compressed Class space can be sized using the CompressedClassSpaceSize option.

Memory leaks are often very difficult to detect, especially those that are slow. A memory leak occurs when an application unintentionally holds references to Java objects or classes, preventing them from being garbage collected. These unintentionally held objects or classes can grow in memory over time, eventually filling up the entire Java heap or Metaspace, causing frequent garbage collections and eventual process termination with a java.lang.OutOfMemoryError error.

For detecting memory leaks, it is important to monitor the live set of the application that is, the amount of Java heap space or Metaspace being used after a full garbage collection. If the live set increases over time after the application has reached a stable state and is under a stable load, that could be a strong indication of a memory leak. The live set and memory usage of an application can be monitored by using JConsole and JDK Mission Control . The memory usage information can also be extracted from garbage collection logs.

Note that if the detail message of the error suggests the exhaustion of the native heap, the application could be encountering a native memory leak. To confirm native memory leaks, use native tools such as pmap or PerfMon , and compare their periodically-collected output to determine the newly-allocated or growing memory sections of the process.


JConsole is a great tool for monitoring resources of Java applications. Among other things, it is helpful in monitoring the usage of various memory pools of an application, including generations of Java heap, Metaspace, Compressed Class Space, and CodeHeap.

In the following screenshots, for an example program, the JConsole shows the usage of Heap Memory and Old Generation steadily increasing over a period of time. This steady growth in memory usage even after several full garbage collections indicates a memory leak.

Figure 3-1 JConsole Heap Memory

Figure 3-2 JConsole Old Generation

JDK Mission Control

You can detect memory leaks early and prevent java.lang.OutOfMemoryError errors using JDK Mission Control (JMC).

Detecting a slow memory leak can be difficult. A typical symptom could be the application becoming slower after running for a long time due to frequent garbage collections. Eventually, java.lang.OutOfMemoryError errors may be seen. However, memory leaks can be detected early, even before such problems occur, by analyzing Java Flight recordings.

Watch if the live set of your application is increasing over time. The live set is the amount of Java heap being used after a full garbage collection, which collects all the unreachable objects. To inspect the live set, start JMC and connect to a JVM using the Java Management console (JMX). Open the MBean Browser tab and look for the GarbageCollectorAggregator MBean under .

Start JMC and start a Time fixed recording (profiling recording) for an hour. Before starting a flight recording, make sure that the option Object Types + Allocation Stack Traces + Path to GC Root is selected from the Memory Leak Detection setting.

Once the recording is complete, the recording file ( .jfr ) opens in JMC. Look at the Automated Analysis Results page. To detect a memory leak focus on the Live Objects section of the page. Here is an example of a recording, which shows a heap size issue:

Figure 3-3 Memory Leak — Automated Analysis Page

Description of «Figure 3-3 Memory Leak — Automated Analysis Page»

You can observe that in the Heap Live Set Trend section, the live set on the heap seems to increase rapidly and the analysis of the reference tree detected a leak candidate.

For further analysis, open the Java Applications page and then click the Memory page. Here is a sample figure of a recording, which shows memory leak issue.

Figure 3-4 Memory Leak — Memory Page

Description of «Figure 3-4 Memory Leak — Memory Page»

You can observe from the graph that the memory usage has increased steadily, which indicates a memory leak issue.

Garbage Collection logs

Memory usage information can be extracted using GC logs as well. If the GC logs show that the application has performed several full garbage collections attempting to reclaim space in Old generation or Metaspace, but without any significant gain, this indicates that the application might be suffering from a memory leak problem.

This will log messages tagged with at least gc using info level, and messages tagged with exactly gc and phases tags using debug level to a file called gc.log .

Diagnosing Java Memory Leaks

Diagnosing leaks in Java source code can be difficult. Usually, it requires very detailed knowledge of the application. In addition, the process is often iterative and lengthy. This section provides information about the tools that you can use to diagnose memory leaks in Java source code.

Diagnostic Data

This section looks at the diagnostic data you can use to troubleshoot memory leaks.

Heap Histograms

You can try to quickly narrow down a memory leak by examining the heap histogram. You can get a heap histogram in several ways:

  • If the Java process is started with the -XX:+PrintClassHistogram command-line option, then the Control+Break handler will produce a heap histogram.
  • You can use the jmap utility to get a heap histogram from a running process:

It is recommended to use the latest utility, jcmd , instead of jmap utility for enhanced diagnostics and reduced performance overhead. See help to see all available options.»>Useful Commands for the jcmd Utility. The command in the following example creates a heap histogram for a running process using jcmd and results similar to the following jmap command.

The output shows the total size and instance count for each class type in the heap. If a sequence of histograms is obtained (for example, every two minutes), then you might be able to see a trend that can lead to further analysis.

For example, if you specify the -XX:+CrashOnOutOfMemoryError command-line option while running your application, then when a java.lang.OutOfMemoryError error is thrown, the JVM will generate a core dump. You can then execute jhsdb jmap on the core file to get a histogram, as shown in the following example.

The above example shows that the java.lang.OutOfMemoryError error was caused by the number of byte arrays (2108 instances in the heap). Without further analysis it is not clear where the byte arrays are allocated. However, the information is still useful.

Heap Dumps

Heap dumps are the most important data to troubleshoot memory leaks. Heap dumps can be collected using jcmd , jmap , JConsole tools, and the -XX:+HeapDumpOnOutOfMemoryError Java option

    You can use the GC.heap_dump command with the jcmd utility to create a heap dump as shown below:

Java Flight Recordings

Figure 3-5 Flight Recording Template Manager

The flight recordings can then be created using any of the following ways:

Читайте также:  Php sqlstate hy000 general error
Class Loader Statistics

Information about class loaders and the number of classes loaded by them can be very helpful in diagnosing memory leaks related to Metaspace and Compressed Class Space.

jmap –clstats

The following is an example of output generated by jmap .

Analysis Tools

This section explores the analysis tools you can use to diagnose memory leaks, including those that can analyze diagnostic data described above.

Heap Dump Analysis Tools

There are many third-party tools available for heap dump analysis. The Eclipse Memory Analyzer Tool (MAT) and YourKit are two examples of commercial tools with memory debugging capabilities. There are many others, and no specific product is recommended.

JDK Mission Control (JMC)

The Flight Recorder records detailed information about the Java runtime and Java applications running on the Java runtime.

This section describes how to debug a memory leak by analyzing a flight recording in JMC.

You can use the Java Flight Recordings to identify the leaking objects. To find the leaking class, open the Memory page and click the Live Objects page. Here is a sample figure of a recording, which shows the leaking class.

Figure 3-6 Memory Leak — Live Objects Page

Description of «Figure 3-6 Memory Leak — Live Objects Page»

You can observe that most of the live objects being tracked are held by Leak$DemoThread , which in turn holds a leaked char[] class. For further analysis, see the Old Object Sample event in the Results tab that contains sampling of the objects that have survived. This event contains the time of allocation, the allocation stack trace, and the path back to the GC root.

When a potentially leaking class is identified, look at the TLAB Allocations page in the JVM Internals page for some samples of where objects were allocated. Here is a sample recording, showing TLAB allocations.

Figure 3-7 Memory Leak — TLAB Allocations

Description of «Figure 3-7 Memory Leak — TLAB Allocations»

Check the class samples being allocated. If the leak is slow, there may be a few allocations of this object and may be no samples. Also, it may be that only a specific allocation site is leading to a leak. You can make required changes to the code to fix the leaking class.

The jfr tool

Java Flight Recorder (JFR) records detailed information about the Java runtime and the Java application running on the Java runtime. This information can be used to identify memory leaks.

To detect a memory leak, JFR must be running at the time that the leak occurs. The overhead of JFR is very low, less than 1%, and it has been designed to be safe to have always on in production.

Start a recording when the application is started using the java command as shown in the following example:

When the JVM runs out of memory and exits due to a java.lang.OutOfMemoryError error, a recording with the prefix hs_oom_pid is often, but not always, written to the directory in which the JVM was started. An alternative way to get a recording is to dump it before the application runs out of memory using the jcmd tool, as shown in the following example:

When you have a recording, use the jfr tool located in the java-home /bin directory to print Old Object Sample events that contain information about potential memory leaks. The following example shows the command and an example of the output from a recording for an application with the pid 16276:

To identify a possible memory leak, review the following elements in the recording:

First, notice that the lastKnownHeapUsage element in the Old Object Sample events is increasing over time, from 63.9 MB in the first event in the example to 121.7 MB in the last event. This increase is an indication that there is a memory leak. Most applications allocate objects during startup and then allocate temporary objects that are periodically garbage collected. Objects that are not garbage collected, for whatever reason, accumulate over time and increase the value of lastKnownHeapUsage .

Next, look at the allocationTime element to see when the object was allocated. Objects that are allocated during startup are typically not memory leaks, neither are objects allocated close to when the dump was taken. The objectAge element shows how long the object has been alive. The startTime and duration elements are not related to when the memory leak occurred, but when the OldObject event was emitted and how long it took to gather data for it. This information can be ignored.

Then look at the object element to see the memory leak candidate; in this example, an object of type java.util.HashMap$Node . It is held by the table field in the java.util.HashMap class, which is held by java.util.HashSet , which in turn is held by the users field of the Application class.

The root element contains information about the GC root. In this example, the Application class is held by a stack variable in the main thread. The eventThread element provides information about the thread that allocated the object.

If the application is started with the -XX:StartFlightRecording:settings=profile option, then the recording also contains the stack trace from where the object was allocated, as shown in the following example:

In this example we can see that the object was put in the HashSet when the storeUser(String, String) method was called. This suggests that the cause of the memory leak might be objects that were not removed from the HashSet when the user logged out.

It is not recommended to always run all applications with the -XX:StartFlightRecording:settings=profile option due to overhead in certain allocation-intensive applications, but is typically OK when debugging. Overhead is usually less than 2%.

Setting path-to-gc-roots=true creates overhead, similar to a full garbage collection, but also provides reference chains back to the GC root, which is usually sufficient information to find the cause of a memory leak.

NetBeans Profiler

The NetBeans Profiler can locate memory leaks very quickly. Commercial memory leak debugging tools can take a long time to locate a leak in a large application. The NetBeans Profiler, however, uses the pattern of memory allocations and reclamations that such objects typically demonstrate. This process includes also the lack of memory reclamations. The profiler can check where these objects were allocated, which often is sufficient to identify the root cause of the leak.

Diagnosing Native Memory Leaks

Several techniques can be used to find and isolate native code memory leaks. In general, there is no ideal solution for all platforms.

The following are some techniques to diagnose leaks in native code.

Tracking All Memory Allocation and Free Calls

A very common practice is to track all allocation and free calls of native allocations. This can be a fairly simple process or a very sophisticated one. Many products over the years have been built up around the tracking of native heap allocations and the use of that memory.

Tools such as IBM Rational Purify can be used to find these leaks in normal native code situations and also find any access to native heap memory that represents assignments to uninitialized memory or accesses to freed memory.

Not all these types of tools will work with Java applications that use native code, and usually these tools are platform-specific. Because the JVM dynamically creates code at runtime, these tools can incorrectly interpret the code and fail to run at all, or give false information. Check with your tool vendor to ensure that the version of the tool works with the version of the JVM you are using.

Читайте также:  Что такое opengl mode error

See SourceForge for many simple and portable native memory leak detecting examples. Most libraries and tools assume that you can recompile or edit the source of the application and place wrapper functions over the allocation functions. The more powerful of these tools allow you to run your application unchanged by interposing over these allocation functions dynamically.

Native memory leaks can result from native allocations performed either internally by the JVM, or from outside the JVM. The following two sections discuss in detail how both of these memory leaks can be diagnosed.

Native Memory Leaks for Allocations performed by the JVM

The JVM has a powerful tool called Native Memory Tracking (NMT) that tracks native memory allocations performed internally by the JVM. Note that this tool cannot track native memory allocated outside of the JVM, for example by JNI code.

Enabling NMT can result in a performance drop of around 5 to 10 percent. Therefore, it should be enabled in production systems cautiously. Additionally, the native memory used by NMT is tracked by the tool itself.

Figure 3-8 JConsole Compressed Class Space

Native Memory Leaks from Outside the JVM

For native memory leaks originating outside the JVM, you can use platform native or other third-party tools for their detection and troubleshooting. Here is a list of some of the tools that you can find useful in troubleshooting native memory leaks caused by allocations performed outside the JVM.

  • Valgrind
  • Purify available on both UNIX platforms and Windows
  • Using Crash Dump or Core files
  • On Windows, search Microsoft Docs for debug support. The Microsoft C++ compiler has the /Md and /Mdd compiler options that will automatically include extra support for tracking memory allocation. User-Mode Dump Heap (UMDH) is also helpful in tracking memory allocations.
  • Linux systems have tools such as mtrace and libnjamd to help in dealing with allocation tracking.

The following section takes a closer look at two of these tools.

A suppression file can be supplied to valgrind with —log-file option in order for it to not consider the JVM internal allocations (such as the Java heap allocation) as potential memory leaks, otherwise it becomes very difficult to parse through the verbose output and manually look for relevant leak reports.

In the above output, Valgrind correctly reports that there are allocations leaking from Java_java_util_zip_Deflater_init native method.

Using Valgrind may have a negative impact on the performance of the monitored application.

Crash Dump or Core files

On UNIX platforms, the pmap tool is helpful in identifying the memory blocks that might be changing/growing in size over time. Once you have identified the growing memory blocks or sections, you can examine the corresponding crash dump or core file(s) to look at those memory blocks. The values and contents at those locations can provide some valuable clues, which can help tie them back to the source code responsible for the allocations in those memory blocks.

From the previous pmap output, we can see that the memory block at 00007f6d690a3000 is growing between the two memory snapshots of the process. Using a core file collected from the process, we can examine the contents of this memory block.

The above shows that there is a repeating string, «Alert: JNI Memory Leak», present in that memory block. Searching in the source code for the string or contents found in the relevant memory block can lead us to the culprit in the code. Here is the code used for this example, where these allocations are performed in JNI code and are not being released.

Hence, the pmap tool and core files can help in getting to the root of native memory leaks caused by allocations performed outside of the JVM.

Tracking All Memory Allocations in the JNI Library

If you write a JNI library, then consider creating a localized way to ensure that your library does not leak memory, by using a simple wrapper approach.

The procedure in the following example is an easy localized allocation tracking approach for a JNI library. First, define the following lines in all source files.

Then, you can use the functions in the following example to watch for leaks.

The JNI library would then need to periodically (or at shutdown) check the value of the total_allocated variable to verify that it made sense. The preceding code could also be expanded to save in a linked list the allocations that remained, and report where the leaked memory was allocated. This is a localized and portable way to track memory allocations in a single set of sources. You would need to ensure that debug_free() was called only with the pointer that came from debug_malloc() , and you would also need to create similar functions for realloc() , calloc() , strdup() , and so forth, if they were used.

A more global way to look for native heap memory leaks involves interposition of the library calls for the entire process.

Monitoring the Objects Pending Finalization

Different commands and options available to monitor objects pending finalization.

When the java.lang.OutOfMemoryError error is thrown with the «Java heap space» detail message, the cause can be the excessive use of finalizers. To diagnose this, you have several options for monitoring the number of objects that are pending finalization:

  • The JConsole management tool can be used to monitor the number of objects that are pending finalization. This tool reports the pending finalization count in the memory statistics on the Summary tab pane. The count is approximate, but it can be used to characterize an application and understand if it relies heavily on finalization.
  • On Linux, the jmap utility can be used with the -finalizerinfo option to print information about objects awaiting finalization.
  • An application can report the approximate number of objects pending finalization using the getObjectPendingFinalizationCount method of the class. Links to the API documentation and example code can be found in Custom Diagnostic Tools. The example code can easily be extended to include the reporting of the pending finalization count.

Troubleshooting a Crash Instead of a java.lang.OutOfMemoryError error

Use the information in the fatal error log or the crash dump to troubleshoot a crash.

Sometimes an application crashes soon after an allocation from the native heap fails. This occurs with native code that does not check for errors returned by the memory allocation functions.

For example, the malloc system call returns null if there is no memory available. If the return from malloc is not checked, then the application might crash when it attempts to access an invalid memory location. Depending on the circumstances, this type of issue can be difficult to locate.

However, sometimes the information from the fatal error log or the crash dump is sufficient to diagnose this issue. The fatal error log is covered in detail in Fatal Error Log. If the cause of the crash is an allocation failure, then determine the reason for the allocation failure. As with any other native heap issue, the system might be configured with an insufficient amount of swap space, another process on the system might be consuming all memory resources, or there might be a leak in the application (or in the APIs that it calls) that causes the system to run out of memory.


Оцените статью