Error opening local file

Error opening local file

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:


I am not able to use ftp command through command line admin mode; this mode should override user rights with admin rights.

Any input would be appreciated!

All replies

Hi Jim Apple Marry Empty Stomach,

Thank you for posting here.

please make sure the file is not opened or locked by another user or application, and make sure that you have permissions to read this file and the directory it is in. Then try again.

I hope the reply would be helpful for you.

if your issue has been resolved, please remember to close your thread by marking useful posts as answer that can be helpful for other person with same issue.


FTP Error — Error Opening Local File

I have an FTP script that contains the following commands:

cd NVDv2_US_EN
cd All
lcd C:\Temp

I run this script using the command

ftp -s:C:\Temp\FTPConnectionIn fo.txt

When I run it, it fails with the following error:

Error opening local file
Invalid argument

When I run the same commands interactively, I do not get the error. Any ideas as to what the problem might be? Thank you!

I changed the ASCII line to BINARY. However, I still get the same error.

The zip file is on the remote server and I want to bring it down to the local machine.

I overlooked one other problem. The lcd line should not have the drive letter and colon. Those aren’t valid for changing a directory. To test that I am right you could remove that line completely and see if this works. Run it from the C:\Temp folder if you can to test that I am right or just look for the downloaded folder in the directory where the script is run.
If you do need to change the directory then use .
cd \Temp
That does assume that you are already on the C drive. If that needs to be changed then let me know. Let me know if you have a question or how this works.

I took out the lcd line completely, but still get the same error. 🙁

The really odd thing is, if I run the exact same commands interactively, there is no error and the file is downloaded successfully. Why would it be different if it’s run from a script?

Thanks for your help!

I can only get zip files from this particular ftp site, but all of them fail.

I’m using XP Pro SP2. I also tried the same script on a server running Win2003 Standard SP2. There, I got two messages:

200 Port command successful
No such file or directory

Again, if I run it interactively on the Win2003 server, no problem, no error, I get the file.

Thanks for the tip, I only have WSFTP LE, and I think it’s pretty old (it was given to me by my employer). In any case, that’s not on the server so I ultimately have to find something that works on the server.

Читайте также:  Error no pool defined at least one pool section must be specified in config file

I’ve done tons of FTP scripts before in the same way and I’ve never run into this error before. Could there be something on the server that I’m logging onto that could be causing this?

The script is connecting to a remote server.

The line that caused «no such file or directory» was «get». That would seem like a very straightforward error, but there *is* such a directory and file, and I can get it when I do the commands interactively.

If I do a «ls» command I get a list of all the files in the directory.

Here’s what I get in a file called ftplog.txt when I run the script file using «ftp -s:C:\Temp\FTPConnectionIn fo.txt > c:\temp\ftplog.txt

220 999.999.999.99 FTP server ready
User (
331 Password required for username.

230 User username logged in.
ftp> cd NVDv2_US_EN
250 CWD command successful
ftp> cd All
250 CWD command successful
ftp> binary
200 Type set to I
ftp> Local directory now C:\Temp.

ftp> lcd C:\Temp
Interactive mode Off .

ftp> prompt
ftp> get

ftp> get

ftp> get

ftp> get

ftp> get

221 Goodbye.

While this is running, the cmd window shows the following (this is literal):
.rror opening local file
:Invalid argument
.rror opening local file
:Invalid argument
.rror opening local file
:Invalid argument
.rror opening local file
:Invalid argument
.rror opening local file
:Invalid argument

There really is that dot before rror and the : before the second message.

Thanks for all your help, I appreciate it!


Error Opening Local File Smbclient

We have collected for you the most relevant information on Error Opening Local File Smbclient, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Error Opening Local File Smbclient before you, so use the ready-made solutions.

linux — Exit codes of smbclient — Stack Overflow
    If the file is downloaded completely, the exit code is 0 (OK) If the file cannot be downloaded, the exit code is 1 (OK) If the testmaschine loses the connection to the share due downloading a file, the exit code is 0 (NOT GOOD), but error («Lost connection. etc.») is written to console.

[SOLVED] SMBCLIENT into Windows not working
    Jan 06, 2017 · I’m trying to copy a file from linux to Windoze using smbclient. I think I have the code right. Here is the code: smbclient -I /folder to send file to -U windowsusername%windowspassword -c «put » When this is ran, it is running from the local folder where the file is stored which is why I didn’t give the path of the file.

Access Denied when you access an SMB file share in Windows
    When you try to access a specific folder that’s located on a Network Appliance (NetApp) Filer or a Windows Server that supports SMB2 from a Windows-based system through the SMB Version 2 protocol, the access is denied. This issue occurs in the following version of Windows: Windows 8.1 Windows Server 2012 R2
Читайте также:  Rocket league error party

SMBClient errors —
    Feb 12, 2015 · I’m waiting for more answer from the community and maybe I will open a case on support. Thursday, April 20, 2017 11:59 AM text/html 4/28/2017 6:32:12 AM Mario Eberhart 0

Problem : smbclient problem NT_STATUS_ACCESS_DENIED .
    Problem : smbclient problem NT_STATUS_ACCESS_DENIED opening remote file March 24, 2019 My Linux box is on a Windows network and I would like to be able to share files …

«smbclient» command not working
    Nov 24, 2008 · I have three files a.txt , b.txt , c.txt in a directory called my_dir1 .These files were created before two or three months . I have a tar file called my_tar1.tar which contains three files a.txt , b.txt , …

Error opening local file :: Support Forum :: WinSCP
    Dec 18, 2017 · Re: Error opening local file 2017-12-07 Please attach a full session log file showing the problem (using the latest version of WinSCP). To generate the session log file, use /log=path_to_log_file command-line argument.

command line — Copy file with smbclient and path to .
    Stack Exchange Network. Stack Exchange network consists of 176 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.. Visit Stack Exchange

[Samba] Tar Failures Using smbclient from Samba 3.0.0beta2 .
    spits out: tarmode is now full, system, hidden, noreset, verbose NT_STATUS_NO_SUCH_FILE listing \ NT_STATUS_NO_SUCH_FILE listing \-U NT_STATUS_NO_SUCH_FILE listing \backuppc NT_STATUS_NO_SUCH_FILE listing \-E NT_STATUS_NO_SUCH_FILE listing \-N NT_STATUS_NO_SUCH_FILE listing \-d NT_STATUS_NO_SUCH_FILE listing \1 NT_STATUS_NO_SUCH_FILE .

Error Opening Local File Smbclient Fixes & Solutions

We are confident that the above descriptions of Error Opening Local File Smbclient and how to fix it will be useful to you. If you have another solution to Error Opening Local File Smbclient or some notes on the existing ways to solve it, then please drop us an email.


Need a regex to find the word «ERROR:», but not match «ERROR: Opening Local File»

I’m writing an error checking script with PowerShell to look over Bitvise SFTP logs and alert if there are any errors. However, I don’t want it to alert me on the string «ERROR: Opening Local File» as this is just telling be that the file already exists in the destination, which is expected. I’m not very good with regex and I can’t seem to find the right combination of elements to find errors other than the one that we can ignore.

4 Answers 4

this seems to do what you want — it uses the way that PoSh can apply a regex match to an entire collection. [grin]

  • creates a sample data set
    when ready to do this for real, replace the entire #region/#endregion block with a Get-Content call.
  • sets the wanted pattern
  • sets the unwanted pattern
  • uses chained regex calls to exclude the unwanted and then to include the wanted
  • assigns that to the $Result collection
  • displays that on screen
Читайте также:  Gta 5 ошибка script hook v critical error как исправить

As @spikey_richie says, you need negative lookahead:

Basically, instead of specifying what you’re looking for, you specify what you don’t want, and wrap that inside (?! and ) .

Something like that should work too : Demo

This situation is similar to those presented in The Greatest Regex Trick Ever — a great read for anyone learning regex. Whie the negative lookahead posted by Glorfindel works well in this case, this technique is easily expandable to multiple exclusions, lookbehinds combined with lookaheads, etc. and still remain readable. The essence of the trick is to capture all exclusions in the overall match and the desired content in Group 1. For the OP, the regex would look like:

(In working code, -Split «`n»
would be replaced by:
Get-Contnet ‘c:\Path\To\Error.log’ )

Again, the beauty of this technique is it’s easily expandable: ‘Exception1|Exception2|Exception3|(Desired Match)’


Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

Site design / logo © 2023 Stack Exchange Inc; user contributions licensed under CC BY-SA . rev 2023.1.12.43153

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.


FTP.exe ls to local Output File Permission Denied on Local Network

I am trying to access a directory on my Filezilla FTP server using the ftp command in Windows from a local computer on the network, and then put a list of all those files in the directory in a text file. I am getting an error opening the local file and Permission denied. These commands however work fine from the server hosting the ftp, and from any external computer not on the network. I just cannot get this to work from a computer on the network.

All firewall settings have been opened for Filezilla, FTP connections, passive FTP connections, and for all file transfers. I am finding that ftp.exe is hanging and locking the local file I am trying to write to. The following is an example of the script:

I am using a domain administrator account, ran the cmd as the administrator, and even gave permissions to these folders and files to everybody to have full control. I even gave the ownership of these files to the ftp user. If I try to delete or modify the above file after running these commands, I still get an access denied. I found that I have to terminate the ftp.exe file in the task manager to get access again.

This is only happening on this machine on the network. If I run the ls command without specifying a local file, it does list the files in the directory just fine. It is having an issue with this file for some reason.

1 Answer 1

I am trying to access a directory on my Filezilla FTP server using the ftp command in Windows from a local computer on the network, and then put a list of all those files in the directory in a text file.


Оцените статью