No drives were found error

No drives were found during Windows Installation during Setup

If you are having a Windows PC with Intel 11th Generation processor (Intel Tiger Lake) and fail to install Windows 11/10 on it, this guide is for you. Many are experiencing No drives were found error during Windows 11/10 installation. The solution we gave applies to HP, Asus, Dell, and other PCs too.

Windows 11/10 Media Creation Tool does not provide supported drivers for computers with Intel Tiger Lake configurations. If you are using a USB drive to install Windows, the process stops before you choose a hard drive for Windows Installation.

No drives were found during Windows 11/10 Installation

If you see No drives were found during Windows 11 or Windows 10 installation on Intel 11th Generation processors, follow the below steps to get rid of the issue and install Windows 11/10 easily. If your PC is not accessible, you need to use another PC for this process.

Intel Volume Management Device technology is used on Intel 11th Generation processors to optimize the storage processes and power consumption. You need to load Intel Rapid Storage Technology (IRST) along with Windows 11 or Windows 10, to get rid of the error. It is not a hardware defect but a normal error, as confirmed by Dell.

  1. Create the Windows 11/10 bootable Installation Media on a USB drive
  2. Download and extract Intel Rapid Storage Technology drivers to the same USB drive
  3. Install Windows 11/10 using Windows Installation Media USB drive

Let’s get into the process to create Windows Installation Media.

1] Create the Windows 11/10 bootable Installation Media on a USB drive

  • Download the Media Creation Tool from the Microsoft website
  • Open it and click on the Accept button
  • Select Language and click Next
  • Then, check the USB flash drive radio button and click Next
  • Plugin your pen drive, select it and click Next
  • Wait for the process to complete. You will see Your USB flash drive is ready once the process is completed.

2] Download and extract Intel Rapid Storage Technology drivers to the same USB drive

After creating Windows 11/10 bootable installation media, you need to download Intel Rapid Storage Technology drivers from your PC manufacturer’s official website according to your device make.

After downloading the IRST driver, extract it onto the PC or directly into the USB drive where your Windows 11/10 are ready for installation.

You need to make sure that you have the Intel Rapid Storage Technology driver and Windows 11 installation media on the same USB drive.

3] Install Windows 11/10 using Windows Installation Media USB drive

Now, start installing Windows 11/10 using the USB drive and proceed until you see No drives were found error. Then, click on Load driver

Then, browse and select the driver on the USB drive. Then, you will see two drivers on the list. Select any one of them and proceed with the installation.

Finally, select the drive where you want to install Windows 11/10 and complete the installation.

This is how you can fix the No drives were found error while installing windows.

How do you fix the problem that Cannot find drives when installing Windows 11/10?

This error usually occurs on computers with Intel 11th Generation processors (Intel Tiger Lake). You can fix it by adding extracted Intel Rapid Storage Technology folder to the USB flash drive where the Windows Installation media is located. Then, load the IRST driver when you see the error.

Читайте также:  Error reading archive files

What is the Intel Rapid Storage Technology Driver?

Intel Rapid Storage Technology (IRST) driver enables the service that monitors the storage management on your PC and improves your PC performance. It also lowers the power consumption on your PC.

Date: February 6, 2022 Tags: Drives, Installation

Related Posts

What is Silent Installation in Windows 11/10 OS?

Invalid media or Track 0 bad – disk unusable

How to fix RAW partition in Windows 11/10

[email protected]

Guru Mandadi is a tech enthusiast and a movie buff who loves writing about computers and movies. He dreams of living a month devoid of all tech and modern-day advancements in a forest.


Effective Fixes for Hard Drive Not Detected in Windows 10 Installation

Errors: No Drives Were Found. Click Load Driver to Provide a Mass Storage Driver for Installation

During the process of installing Windows OS on a specified HDD or SSD, you may surprisingly find that the hard disk is not detected during the Windows installation, with either of the following error messages coming along.

«We couldn’t find any drives. To get a storage driver, click Load driver.» «No drives were found. Click Load Driver to provide a mass storage driver for installation.»

However, clicking «Load Driver» doesn’t solve the problem at all. What’s the next move then? Have you found viable solutions to troubleshoot hard disk not detected in Windows 10 or Windows 7 installation even it’s normally connected to the computer?

Workable Solutions Step-by-step Troubleshooting
6 Solutions to Fix Hard Drive Not Detected Method 1. Use a Different SATA Port. Full steps
Method 2. Load RAID Driver for RAID Disk. Full steps
Method 3. Check the Hard Drive in BIOS. Full steps
More ways.
Bonus Tip: Free Partition Manager to Enhance System Performance Launch EaseUS Partition Master on your PC > Free up space. Full steps

How to Fix Hard Disk Not Detected in Windows 10 Installation

Even though Windows 10 or Windows 7 installations include almost all disk drivers, the «No drives were found. Click load driver to provide a mass storage driver for installation» issue occurs from time to time and you find no way to out. When you encounter Windows 10 install not detecting hard drive or Windows 7 couldn’t find any drivers to get storage driver problems, try the practical six ways below.

Method 1. Use a Different SATA Port

If you are using a desktop computer, try using a different SATA port and see if that helps at all. Sometimes they come with two different controllers.

Method 2. Load RAID Driver for RAID Disk

Windows 10 install not detecting hard drive mostly occurs on RAID disk. In this case, you need to load RAID drivers manually to fix the issue.

Step 1. On the Windows Setup windows, you will see Where do you want to install Windows? And there is no hard drive detected. Click «Load Drivers» at the bottom left of the screen, then click «Browse» to choose the device driver.

Step 2. Go to your computer or storage device to find and load an available RAID driver.

Step 3. After the device diver has been loaded, Windows 10 installing will successfully detect the hard disk. Then, follow the onscreen instructions to install Windows.

Method 3. Check the Hard Drive in BIOS

Otherwise, take some time to check if hard drive shows up in BIOS, especially you’re installing an operating system from a bootable USB or CD/DVD disc.

By holding and pressing F2, you’ll enter BIOS settings. See if the hard drive showing up there. Click solution to repair hard drive not showing in BIOS.

Читайте также:  Error opening the login server connection

If not, check your BIOS settings for the following parameters:
* SATA configuration -> Enhanced
* Configure SATA -> AHCI

Method 4. Check the Status of Your Hard Drive

Step 1. Press Windows + R and the window will pop up.

Step 2. Input devmgmt.msc and press Enter.

Step 3. Choose Disk Drives and right-click the hard drive.

Step 4. Click Properties and check the status of your hard drive. If it is Ok, showing «This device is working properly».

Method 5. Boot from Windows 10 Install Media

Microsoft also provides a method about boot from the Window 10 Install Media. You can take these steps to fix the issues «drive not showing up when Windows 10 install».

Step 1. Choose Install Now > Accept License Agreement > Choose the installation type and click «Custom Advanced».

Step 2. Press Shift + F10.

Input each command and press Enter: DISKPART > list volume > select disk* > clean > convert mbr > create partition primary > active > format quick fs=ntfs >exit

Then you can install Windows again.

Method 6. Ask Help from the Manufacturer

Since the manner of installing or reinstalling Windows OS happens so frequently that most personal PC or desktop manufacturers have built-in checking tools for quick troubleshooting and repair. For example, Dell Online Diagnostic Tool, Lenovo Diagnostic Software for Hard Drive Quick Test, etc. So if you’re their customers, feel no hesitate to ask help from the manufacturer and learn how to use tools to fix hard drive not detected issues alright.

Bonus Tip: Free Partition Master to Enhance System Performance

You can enjoy the exciting features of the latest system after successful Windows 10 installing. Furthermore, to enhance system performance and let software and hardware cooperate to achieve an optimal operating state, it’s necessary for you to have free partition management software, which enables you to organize and optimize your hard drive to extend your computer’s life and capableness.

EaseUS Partition Master Free is a versatile partition management program that provides one-stop partition and disk management solutions, for instances:

  • Resize/move partitions by sliding the partition left and right or enter the exact partition size you want, such as increase C drive to speed up your computer
  • Create, format and delete partitions
  • Completely wipe out all the data on the hard disk permanently

Windows 11/10/8/7 100% Secure

Now, download this ultimate Windows 10/8/7 disk management tool and follow the simple steps below to resize and move your partitions.

Step 1. Shrink partition to free up space to extend partition.

If the hard drive has enough unallocated space to extend the target partition, jump to Step 2, and continue. If not, free up space first:

  • At the Partition Manager section, right-click on a partition next to the target partition and select «Resize/Move».
  • Drag the partition ends to free up space, leaving enough unallocated space behind the target partition, click «OK».

Step 2. Extend the target partition.

Right-click on the target partition you want to extend and select «Resize/Move».

Drag the target partition handle into the unallocated space to extend partition.

Step 3. Keep all changes.

Click the «Execute Task» button and click «Apply» to keep all changes.

Windows 11/10/8/7 100% Secure

Windows 10 Install Not Detecting Hard Drive FAQs

1. How do I fix no device drivers found?

Fixes for No Device Drivers Were Found:

Читайте также:  Error unsupported dictionary type hash

Solution 1. Switch to a USB 2.0 Port

Solution 2. Set the partition where you want to install Windows to as Activeewe

Solution 3. Create a New Disc

Solution 4. Enable the xHCI hand-off Option in BIOS

Solution 5. Change everything to legacy and set the boot device to your DVD or USB

2. Where do you want to install Windows 10 no drives were found?

To fix «No drives were found. Click load driver to provide a mass storage driver for installation», do it in the following way:

Step 1. Click «Load Drivers» at the bottom left of the screen, then click «Browse» to choose the device driver.

Step 2. Choose and load an available RAID driver.

Step 3. After Windows 10 installing successfully detects the hard disk, follow the onscreen instructions to install Windows.

3. Where do you want to install Windows 7 no drives were found?

Fix: No Hard Drives Found in Windows 7 Installer:

Solution 1. Format the hard drive using diskpart in command prompt.

Solution 2. Load the hard drive storage controller drivers from a USB into the Windows setup.

Solution 3. Change the boot controller mode in BIOS.

Solution 4. Reset BIOS.

Solution 5. Use a different SATA port.

4. How do I install drivers for my hard drive?

The basic steps to install drivers for a hard drive are:

Step 1. Configure the drive as a master or slave device (PATA only).

Step 2. Mount the drive in the chassis.

Step 3. Connect the data cable to the drive and to the PATA or SATA interface.

Step 4. Connect a power cable to the drive.

Step 5. Restart the system and run the BIOS Setup.

Step 6. If you are also installing a PATA or SATA interface card or RAID adapter, configure that card per the maker’s instructions and attach the cables to it.

How Can We Help You

About the Author

Roxanne is one of the main contributors to EaseUS and has created multiple posts on digital devices like PCs, Mobile phones, tablets, Mac, etc. She loves to share ideas with people of the same interest.

Author Jean has been writing tech articles since she was graduated from university. She has been part of the EaseUS team for over 5 years. Her special focuses are data recovery, disk partitioning, data space optimization, data backup and Mac OS. By the way, she’s an aviation fan!

Product Reviews

I love that the changes you make with EaseUS Partition Master Free aren’t immediately applied to the disks. It makes it way easier to play out what will happen after you’ve made all the changes. I also think the overall look and feel of EaseUS Partition Master Free makes whatever you’re doing with your computer’s partitions easy.

Partition Master Free can Resize, Move, Merge, Migrate, and Copy disks or partitions; convert to local, change label, defragment, check and explore partition; and much more. A premium upgrade adds free tech support and the ability to resize dynamic volumes.

It won’t hot image your drives or align them, but since it’s coupled with a partition manager, it allows you do perform many tasks at once, instead of just cloning drives. You can move partitions around, resize them, defragment, and more, along with the other tools you’d expect from a cloning tool.





Hot Topics in 2022

Get EaseUS Partition Master

Your best companion for disk partitioning, MBR to GPT/GPT to MBR conversion,even OS migration


Оцените статью