Pool error network error



Console: Pool error

When you see «Pool error» in your 24h logs or worker’s latest activity, this can describe different issues connected to the pool, your network, or your connection with the pool.

The most common issues connected to this console error are:

  • Connecting to the pool: It could be that mining client restarted (due to profit switch, trigger, or any manual action you made) and your rig hasn’t connected to the pool yet, but we detected the error anyway. If this is the case, the number of times this error occured will be small.
  • Wrong stratum address or port: It could be that there are different ports reserved for different mining setups, geographic location, coins, algorithm, or more. Make sure to check if you have enetered correct stratum address with correct port.
  • Pool issues: It could be that pool is having issues at the moment and you cannot connect to it. As this depends entirely on the pool, you will need to check their website and official channels to learn more about what the issue could be. You can also use our pool status checker to see if we are also having troubles pinging the pool. Also note that some pools require different identification methods — on some you can identify with wallet address and on others you need to register and use username as identification. Double check if you are using correct configuration for mining on selected pool. To test it even further, you can try to set up mining on another pool and in this way check if the issues are actually on the pool’s side.
  • Network issues: It could be that you have troubles connecting to the pool as there are troubles in your network. Again, you can use pool status checker to see if we are also having the troubles pinging the pool.

To find the pools with lowest latency, use Sonar.

It’s easy and free to get started

Troubleshooting

Connect and chat with thousands of fellow miners. Keep up with the updates and receive real-time support from our developers.

Источник

Docker «ERROR: could not find an available, non-overlapping IPv4 address pool among the defaults to assign to the network»

I have a directory apkmirror-scraper-compose with the following structure:

I’m trying to run the following docker-compose.yml :

where the Dockerfile for tor is

that for privoxy is

where config consists of the two lines

and the Dockerfile for scraper is

where requirements.txt contains the single line requests . Finally, the program newnym.py is designed to simply test whether changing the IP address using Tor is working:

The docker-compose build builds successfully, but if I try docker-compose up , I get the following error message:

I tried searching for help on this error message, but couldn’t find any. What is causing this error?

21 Answers

I’ve seen it suggested docker may be at its maximum of created networks. The command docker network prune can be used to remove all networks not used by at least one container.

My issue ended up being, as Robert commented about: an issue with openvpn service openvpn stop ‘solved’ the problem.

I ran into this problem because I had OpenVPN running. As soon as I killed OpenVPN, docker-compose up fired right up, and the error disappeared.

I ran in this problem with OpenVPN working as well and I’ve found a solution where you should NOT stop/start OpenVPN server.

Idea that You should specify what exactly subnet you want to use. In docker-compose.yml write:

That’s it. Now, default network will be used and if your VPN did not assign you something from 172.16.57.* subnet, you’re fine.

Following Peter Hauge’s comment, upon running docker network ls I saw (among other lines) the following:

The line with NAME and DRIVER as both host seems to be what he is referring to with «networks already created on your host». So, following https://gist.github.com/bastman/5b57ddb3c11942094f8d0a97d461b430, I ran the command

Now docker-compose up works (although newnym.py produces an error).

I have the same problem. I ran docker system prune -a —volumes , docker network prune , but neither helped me.

I use a VPN, I turned off the VPN and, after it docker started normal and was able to create a network. After that, you can enable VPN again.

As other answers mentioned, Docker’s default local bridge network only supports 30 different networks (each one of them uniquely identifiable by their name). If you are not using them, then docker network prune will do the trick.

However, you might be interested in establishing more than 30 containers, each with their own network. Were you interested in doing so then you would need to define an overlay network. This is a bit more tricky but extremely well documented here.

EDIT (May 2020): Link has become unavailable, going through the docs there’s not an exact replacement, but I would recommend starting from here.

Long version

Disclaimer: I am not very knowledgeable about Docker networking, but this did the trick for me. YMMV.

When I ran docker run my-image the networking gave me no problems, but when I converted this command to a docker-compose.yml file, I got the same error as the OP.

I read Arenim’s answer and some other stuff on the internet that suggested to re-use an existing network.

You can find existing networks like this:

I wanted to reuse the default bridge network, so I added

to the the root of my docker-compose.yml (so not inside one of my services , but at the root indentation).

I now got the following error:

ERROR: for your-container network-scoped alias is supported only for containers in user defined networks

This led met to this Docker Github issue, that plainly stated that I should add the network_mode object to my docker-compose :

This was tested on Docker version 18.09.8 , docker-compose version 1.24.1 and the compose file format 3.7 .

Источник

ERROR: Pool overlaps with other one on this address space #85

Comments

Thanks for this projet ! Installing Mailman3 is tricky and I hope your docker images will help

However I’m getting an error at the early stage:

the host is a regular Linux box:

Читайте также:  Php connection error array

The docker version seems up to date

The text was updated successfully, but these errors were encountered:

Are you using 172.19.199.1/24 subnet for something else in your network?

The default compose file provided uses this subnet to create a bridge network and allocates static IPs to the containers.

If this subnet is already in use, you can just change it to a different subnet. You’d have to change
environment variables and other IPAddresses allocated to each container too.

See the docker-compose.yaml file in the root of the project.

Thanks for the quick answer 👍

FTR I am using the docker-compose.yaml file at the root of the project

There’s no other docker containers running on the host while I’m doing this test.

I changed the subnet to 172.20.199.1/24 and modified the other IP adresse accordingly and I still get the same error..

Not exactly sure about what is going on but this thread from docker might be relevant?

Actually it seems that a simple sevirce docker restart solved the issue.

Sorry about that. Thanks for your help !

In case someone else is google’ing here: Even if the containers are down the networks are still persist. With no container running docker network prune did it. Guess restarting the service returns the same result.

I think the semantics depend on how you actually stop the containers, docker-compose stop actually only stops the containers, but, docker-compose down stops and remove the containers & network.

Working when I delete the pool network

remove the pool_network

docker network rm pool_network

İt was about the wrong ip address in compose.yml in my case

my case, I have to tun

Then restart Docker service.

networks:
tut07-frontend:
driver: bridge
ipam:
driver: default
config:
— subnet: 172.10.1.0/24
tut07-backend:
driver: bridge
ipam:
driver: default
config:
— subnet: 172.10.2.0/23

services:
tut07-db:
build: ./db
command: —default-authentication-plugin=mysql_native_password
ports:
— 3306:3306
networks:
tut07-backend:
ipv4_address: 172.10.3.2
env_file:
— ./development.env
tut07-www:
build: ./www
ports:
— 8080:80
volumes:
— ./src:/var/www/html/
networks:
tut07-backend:
ipv4_address: 172.10.2.2
tut07-frontend:
ipv4_address: 172.10.1.2
depends_on:
— tut07-db
env_file:
— ./development.env

#######################################################
above is my docker compose yml file but i got the same error even i have change

docker network prune

In case someone else is google’ing here: Even if the containers are down the networks are still persist. With no container running docker network prune did it. Guess restarting the service returns the same result.

Источник

Troubleshooting

Browse through the most common errors and find the right solution to your problem.

When you have minerstat software properly installed and your worker is mining but showing offline in minerstat dashboard and online on the pool, something broke the communication between minerstat software, minerstat dashboard, and your machine. This . Read more →

First of all, there’s no need to panic. This may be a symptom of a problem that needs further inspection and fixing, or can be something absolutely normal and nothing to worry about. Read more →

The first thing to note is do not panic — there are many reasons for a rig to be restarting, and it may take some time to diagnose, especially if a problem is only ocurring periodicaly. In that case, Triggers functionality can be a great aid, bu. Read more →

GPU rigs If your hardware is undetected it means that your mining rig didn’t manage to send out data to the minerstat server about your hardware. This could be due to the node crash or you didn’t start mining yet. Read more →

Coin can be displayed as ‘NO’ or ‘Unknown’ in two cases. A) We didn’t add support for it yet In case your worker shows «NO» under the coin’s name, but it is mining normally and you can see the pool on which the . Read more →

In case your GPUs are not displayed with their model name (for example, GTX 1080Ti, RX 580, etc.) do note that this is only a display interface issue and all other functionalities should work as expected. Read more →

If you see drivers reporting temperature 511 °C this isn’t the actual temperature of your GPU. Drivers denote a driver error with such value of temperature. Read more →

If msOS doesn’t detect all of your GPUs in the system, check the following. BIOS settings Set UEFI boot in BIOS Set all GPUs to PCIe GEN 2. Read more →

In case auto-fans aren’t working or you have set up the fan triggers and you see that the trigger was sent but wasn’t applied, your GPU drivers aren’t accepting fan control command.Usually, this is connected with too intense overclocking a. Read more →

If you are getting errors like Invalid user provided or Invalid wallet provided you are not mining to correct wallet address. You will need to recheck your worker’s config. Read more →

The pool address to which you connect for mining consists of two elements: Domain, subdomain, or IP Port These two elements are connected with the colon, like this: eu.sandbox. Read more →

When you are benchmarking your cards, it can happen that some mining clients won’t report the speed. In this case, the result of the benchmark for this mining client and algorithm combination will be Failed (Missing hashrate). Read more →

If you get the following certificate has expired error on your msOS rig Error (Error: certificate has expired) Waiting for connection this means that the date and time in your BIOS aren’t properly set (either they date into the past or in t. Read more →

If you see the following error on your screen: error: /boot/vmlinuz-5.0. Read more →

If you see an error that says EHOSTUNREACH, it could be that you are having internet issues. You can quickly check if this is the case by calling netcheck command. Read more →

If you are mining on Windows and unlucky enough to install recent Nvidia drivers, then you want to use our simple NVML patcher. Usage is simple: Just close down every application/driver control panel that can use NVML, then run the . Read more →

Читайте также:  Svchost exe application error

An error Connect error: «Connection refused» is usually connected with the following reasons: No internet access; DNS issues; Incompatibe mining client; IP banned by the pool; Pool is unreachable (having temporary issues); Hardware related, . Read more →

Sometimes mining client will show you an output such as: API bind error TCP API bind address already in use Bind failed with error Port is busy Port already in use Failed to bind to port These errors occur when the previous mining. Read more →

If you run into an error saying that Nvidia-settings couldn’t connect to the accessibility bus, it means that the driver had failed to locate the GPU. In case that you have only one GPU in the system, make sure you have plugged it to the first x16. Read more →

If you see an error «Unable to query number of CUDA devices» your drivers didn’t detect any GPU in the system and because of that the mining won’t work. There can be several different reasons for it. Read more →

There could be different reasons why your socket connection was closed by pool. We will list the most common ones. Read more →

Kernel panic error that causes out of memory state and no killable process often happens to AMD GPUs that are used for mining CryptoNight variants algorithms. To fix this error, you need to do add more virtual memory to your system. Read more →

If you have Nvidia GPUs and you get libEGL warning: DRI2: failed to authenticate error on your msOS, please type mreconf in the console and the system will restore. Read more →

If you are getting error The semaphore timeout period has expired as a response to mining to a pool, your router is probably blocking the connection to the pool. Asus routers have an option for «vulnerability protection». Read more →

Sometimes PhoenixMiner will exit with the following error: GPU1: clSetKernelArg (-48) Fatal error detected. Restarting. Read more →

If you are getting Unable to enum CUDA GPUs: invalid device ordinal error, then you can try the following: Update your BIOS to the latest version. Call pci-realloc command. Read more →

If you run into an error saying that T-Rex instance wasn’t validated it means that the miner has been unable to connect to sub-domains of trex-miner.com, port 443. Read more →

When you see «Pool error» in your 24h logs or worker’s latest activity, this can describe different issues connected to the pool, your network, or your connection with the pool. The most common issues connected to this console error a. Read more →

If you see the «Authorization error» on your 24h logs or worker’s latest activity, this means that the pool has rejected your login info. Possible reasons for rejection: Pool rejected your login due to invalid wallet address or . Read more →

The «Config error» can be found in 24h logs and worker’s latest activity when the configuration of the mining client is incorrect. This can happen for a lot of different reasons as every mining client uses their own parameter structure a. Read more →

The «Mining client error» that is shown in your 24h logs or worker’s latest activity indicates that the error is connected to the mining client. The most common situtation when this error appears is when the mining client is using an API. Read more →

When you see a «GPU error» on your 24h logs or worker’s latest activity there is a trouble with detecting information connected to your GPU — in some cases, you will also be able to see which GPUs are the problematic ones. We suggest . Read more →

If you see «Driver error» in your 24h logs or worker’s latest activity, the error means that there are issues with the drivers on the rig. To fix this error, check the following: Check if you have added your worker in correct ty. Read more →

«System message» in your 24h logs or worker’s latest activity denotes the rig’s last response to manual or automatic reboot, shut down, stop and start mining, or power cycle commands. It is just a notification for you to know that th. Read more →

The status audit is part of a real-time summary section and available under the summary tab in the diagnostic. It shows the number of workers with specific status: online, offline, and idle. Read more →

The temperature audit is part of a real-time summary section and available under the summary tab in the diagnostic. It shows the number of workers with a specific issue: workers with at least one GPU or board over the hot limit and workers with a. Read more →

A missing data audit is part of a real-time summary section and available under the summary tab in the diagnostic. It shows the number of workers with a specific issue: missing temperature data and missing fan data. Read more →

A mining issue audit is part of a real-time summary section and available under the summary tab in the diagnostic. It shows the number of workers with a specific issue: missing hashrate (or hashrate speed 0 H/s) and low efficiency (efficiency sma. Read more →

The profitability trend is available under the statistics tab in the diagnostic and shows average daily earnings on your account with a profitability range (minimum and maximum peaks of estimated daily earnings; not taking offline periods in. Read more →

The uptime is available under the statistics tab in the diagnostic and is calculated from your global statistics data. This means that it is calculated as the ratio between data points when your rig was detected as online and the total sum o. Read more →

Same as uptime, volatility is available under the statistics tab in the diagnostic and is calculated from your global statistics data. It takes into consideration all data points with online status and is calculated as the ratio between stan. Read more →

Читайте также:  Zmodeler error opening file

The GPU temperature alerts audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined de. Read more →

Offline alerts audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined depending on h. Read more →

The ASIC alerts audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined depending on . Read more →

The hashrate drop alerts audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined depe. Read more →

The efficiency drop alerts audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined de. Read more →

The temperature triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined depe. Read more →

Unresponsive triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined dependi. Read more →

The idle triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined depending o. Read more →

The inactive triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined dependi. Read more →

The hashrate drop triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined de. Read more →

The efficiency drop triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined . Read more →

The earnings drop triggers audit is available under the activity tab in the diagnostic and shows the current grade from the data obtained yesterday and a small historical chart for the performance of the last week. The grade is determined de. Read more →

The console errors — driver audit is available under the activity tab in the diagnostic and is currently shown only if you have at least one msOS rig running. The audit shows the current grade from the data obtained yesterday and a small his. Read more →

The console errors — pool audit is available under the activity tab in the diagnostic and is currently shown only if you have at least one msOS rig running. The audit shows the current grade from the data obtained yesterday and a small histo. Read more →

The console errors — config audit is available under the activity tab in diagnostic and is currently shown only if you have at least one msOS rig running. The audit shows the current grade from the data obtained yesterday and a small histori. Read more →

The console errors — authorization audit is available under the activity tab in the diagnostic and is currently shown only if you have at least one msOS rig running. The audit shows the current grade from the data obtained yesterday and a sm. Read more →

The console errors audit — mining client is available under the activity tab in the diagnostic and is currently shown only if you have at least one msOS rig running. The audit shows the current grade from the data obtained yesterday and a small h. Read more →

The console errors audit — GPU is available under the activity tab in the diagnostic and is currently shown only if you have at least one msOS rig running. The audit shows the current grade from the data obtained yesterday and a small historical chart. Read more →

Thermal throttling is a state that happens when your GPU is taking too much load and starts overheating. For Nvidia 3000 series such events are quite common, so it is extremely important to have good cooling system and smart position of your GPUs. Read more →

Thermal throttling is a state that happens when your GPU is taking too much load and starts overheating. For Nvidia 3000 series such events are quite common, so it is extremely important to have good cooling system and smart position of your GPUs. Read more →

Thermal throttling is a state that happens when your GPU is taking too much load and starts overheating. For Nvidia 3000 series such events are quite common, so it is extremely important to have good cooling system and smart position of your GPUs. Read more →

Thermal throttling is a state that happens when your GPU is taking too much load and starts overheating. For Nvidia 3000 series such events are quite common, so it is extremely important to have good cooling system and smart position of your GPUs. Read more →

Источник

Оцените статью
toolgir.ru
Adblock
detector